IP Telephony and Phones

Hello Guys,I would like your help in order to give me some answers regarding my doubts about SAF.I will configure a SIP trunk in order to use SAF for my calls to other country.Is that all that i need to get it working? I mean? Should i build route pa...

I am trying to set up some 7925 phones and was going to set up the WLAN via BDU. When the phone is powered on, it grabs the wlandefault.xml. However, after it grabs it, the settings are not what was configured in the BDU. I have saved as default v...

Hi All,I have a question about cme in SRST mode:We have configured SRST mode with "auto provision all" and SRST works fine.But when the WAN comes back, the router is still using the cme dial peers instead of the VoIP dial-peer to CUCM (h.323).I thoug...

Problem Description : Cisco Unity Connection version: 8.0.3.20000-18 User not able to receive the voice mails on his personal inbox ( works fine for the physical phone mail box ) Can some one kindly let me know what are the configurations that i need...

Hello,we would like to get an easy way to find the non-default values of Service Parameters in a CUCM 8.x.Moreover, we would like to get a way to find the differences among the Service Parameters of the various nodes of a cluster, so that we can easi...

Hi All,Does the current design guidelines support multiple Unity Connection subscribers or is the recommended design still a publisher with a single subscriber? We are looking to deploy a 20k subscriber cluster and i was interested in load balancing ...

I am configuring a E1 PRI in Australia connected to a 3935 GW which has a SIP trunk to a 8.6 Call Manager. The circuit is in and good with no errors and inbound calls from the PSTN work fine. However, outbound calls connect but there is no audio from...

cisco ATA187 status unregistered any earliest solutions highly appreciatedssd

I have an ATA 187 connected to CUCM 8.5. When I attempt to call the fax or analog phone attached to the ATA187 from outside the company it answers on the receiving end (at the ATA) but the calling side continues to ring. If I try calling from an inte...

Hi All,I have 60 vg224's installed and need to try and build some resilience into them by dual homing them to different switches.Anybody got any ideas ?

The company I work for is a medium sized business that hires one person as an internal support/helpdesk/sys admin rotating them in and out once per year.  It's my luck that it's my turn and ALL of our businesses information technology needs fall on m...