Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
hi,i'm using ccme 7.0 and cisco unity express, i have configured voicemail and it works fine.now i need to use AA, what i need to do?i shud use B-ACD, or just the script aa.aef.please help
We want to kwow if it is possible to display the calling name on IP Phones for external incoming calls.In other words, when a external call arrives, the CUCM will lookup on an directory service (internal or external) to find a name matching the calli...
Hi,I have CUCM 7.1.2. I created some route group. I have a route list with some of these route group added. My question is .... Can I restrict the jumps to be given in the route list for the same call? I mean, to prevent a call is routed by a route g...
Calls are extablishing fine between the Nortel and CUCM users over ISDN E1 PRI and vise versa.However When the IP Phone calls the PBX Phone the PBX phone rings fine and the call is established but you cannot hear the PBX phone ringing through your IP...
Can we do MLPP IP to IP. In the following scenery Manager - A want to call anyone of the employee IP Phone; even the employee is in the call or hold, this can be achieved by MLPP, please light me on MLPP solution.
I am having problems with the call park feature disconnecting once the person has been parked. The system will hold the call for around 30 seconds and hang up. We have a 2811 Router with CME installed and it is running version 12.4 (4) T2. We had a...
I have two 7961's that I have set up Busy Lamp Fields on their phones. When one of the extensions that is in the BLF is off hook the red light does not light up on their phone. I have this set up on other phones in call manager and thought I had dupl...
I've got a 3845 on IOS 12.4(20)T3 and there are two dial-peers configured as follows.dial-peer voice 80000 voip description Intersite Dialing via ITS-UCM02-PP destination-pattern 001.... progress_ind alert enable 8 progress_ind progress enable 8 prog...
My customer is using EUM (Exchange Unified Messaging) integrated into UCM 7.02.20000-5. So far the EUM is a 1st run product and does not have the feature Unity has to delay the greeting during a transfer.So what is happening is when a call comes into...
Hi,I understand that there are dsp on IP phone. Can i get an explanation when exactly these dsp on ip phone will be used.-Prakash
Unity 7.0.2===========Current setup only allows the addition of a new subscriber by importing from Exchange (2003SP2). In the "Type of Subscriber\New Subscriber" drop down, all entries greyed out and non-selectable.How do I go about adding subscribe...
i upgraded 7911 phone with sip firmwareI would like to register this in betamax voip servers like freecall, action voip and allAnyone done this before????
The client in question is using CUCM 7.0 and has a 7941 IP phone. We've been seeing some strange intermittant behaviour. When the call is connected it will sometimes be immediately placed on hold and then drop off the phone. The caller will be lef...
When a user gets a call on the cisco phone and the user transfers the caller to another phone voicemail, he presses transfer *1 and the users extension But by the time the user presses the finaly transfer the greeting as ended it does not restart. Is...
We opened an office in Shanghai and I am trying to set up a route plan so they can dial 800#'s correctly. The issue is I am not sure how they would normally call a toll free # (aka 9.01[800]XXX XXXXSo I have an end user there who said she can normall...
