IP Telephony and Phones

Dear friends,one of our client want to activate meet me conference for 50 users. but at a time only 10 users can attend meet me conference. software conference bridge will support 128 users at a time. In service parameter meet me conference i gave ...

I have created a local conference bridge resource on a 2811, which is registered on our CUCM 6.1:sccp local FastEthernet0/0sccp ccm 10.40.122.82 identifier 1 sccp ccm 10.30.8.81 identifier 2 sccp ccm 10.40.123.80 identifier 3 sccp ccm 10.30.9.81 iden...

Does it possible to send custom ringback tone to caller for incoming call via SIP trunk to CME ? Similar to ATA186 SIP "ConnectMode" bit19 feature? Which means the caller will hear the CME generated ringback tone rather then the telco ringback tone?

Dear All,I'm planning to upgrade CUCM from version 4.2.3 to 6.1.2, on 2 servers (Pub & Sub), I have two questions regarding this upgrade:First======I received 2 different PAK with the same Product Number (CM6.1U4-K9-7835) SW Upgrade CM 4.1/4.2 to CM ...

Hi,I've set up Attendant Console. Configured the ac user as an application user, associated him with the pilot point (which is registered) and gave him the right CTI enabled and CTI Allow Control of All Devices. For the ACDeviceAuthenticationUser I a...

I just upgraded my 2811 and noticed that "voice register dn" is no longer in the command structure. I am using "Cisco Unified Communications Manager Express: SIP Implementation Guide" as my reference. I had it working at code version 12.4.11, but af...

Symptom-------I'm testing the MoH between IP Phones in the LAB (No PSTN available)1. in normal mode, remote IP phone can get MoH from local SRST/CME router successfully2. in SRST/CME mode, I hear ToH when press Hold button in remote IP PhoneCCM6.1.2 ...

Guys,Got a problem with some overlapping numbers and tried using the the line device CSS Approach as outlined in the SRND but feel I have an issue based on the CTI port caveat. I.e the CTI port wont follow the Line device CSS approach.The phone syste...

I'm need Norwegian fils to phone 7941G, on UC520W system.where can i find it ???I'm think the file is no-mk-sccp.jarRegards -Pretorius

Hi All, is there any way to split subscribers in unity connection? for example incoming calls hit to auto attendant, then caller can dial extension at any time. is it possible to allow caller be able to reach only certain subscribers? I did CSS and p...

My bacd issueAttached is my config. I get fast busy tone and Unknown number on display when I dial the pilot number from any CME phone. I can dial hunt-pilot directly and call get routed correctly or give the aa-pilot to hunt-pilot and ring the phone...

I'm trying to do a BAT on cucmbe 7.0.1-11000-2.It's synced with the ldap. When i'm trying to update the "primary user device" field, nothing happened, other fields such as mobility and MVA enable/disable is ok. The job scheduler reported a success.Ju...

Hi All,Running CM6.1.1.2000 and have just tried uploading the load for the 7916 module. I have done this on a test box with the same version, but this one will not come up as an option to choose when I go to choose the expansion module?Any ideas?