IP Telephony and Phones

the event log on my sub is filling up with 'transiet connection attempt' errors. I had a problem this morning where the pub/sub sql was not replication, as users were not able to un callfwd phones. I found Doc id 43581, and I stopped/started the CD...

I didn't know this was possible, but one of my users at extension 1501 was able to forward her calls to extension 1502. 1502 also had her phone forwarded to 1501. CCM allows you to do this, why? Is there a way to disable this from happening.BTW, I a...

Could anyone offer an explanation as to why each phone that registers creates 3 dial-peers (two of which are the identical E.164 number with different preferences). I understand why there is the dial-peer for the four digit extension and the first f...

I am not able to login to root through SSH in CCM6.0. can you help method to activate root account.

Hi Guys,I am experiencing a problem where if users receive an external call from the pstn, and the caller presses the mute button, i get a start/stop noise/interference on my phone.This is particularly audible when on speakerphone.Any help or suggest...

HiOn 4.1.3 can the "Cisco CallManager User Options Log On" page be customised.We want to add a helpdesk phone number to it if people have problems logging in.

HiWith call manager, you can receive up to 200 calls before you receive the busy signal on a 7941/7961 phone.It is not clear to me how many inbound calls you can receive with ccme on a 7941/7961. It look like only two but could someone confirmMany th...

can someone explain all of the ins and outs of what happens whenlisten to message via email rather than from phone. does mwi light go out?. is it considered a saved message to unity

We are using CIPC 2.1.2.0 with Call Manager 6.0.1.2119-1. Using extension mobilty and configured speed dials. Internal numbers work but external numbers are blank when the speed dial button is clicked on.The phone button template is the standard IPC...

HiHave successfully installed the above configuration.I need a CUE script that routes a call directly to a certain voicemailbox.Is that possible?BRMagnus

does personal communicator require presense to work or can I just register it with CM and use it like a softphone?

Got incomging calls going to remote destinations but cannot pick up calls from IP phone using 'Mobility' softkey. Will this work with MGCP or does it need H.323 (like Mobile Voice Access)??Thanks

I'm starting to run low on available extensions in my CCM 4.2(3) and wanted to know if there is a report that will tell me if an extension was ever used or not?TIA.John

I am using CME 4.1 on a 2811 router which has a 2 port FXS card We need to install 2 analog phones and want them to communicate with the IP phones registered to the CMECan anyone let me know the configuration required on the CME or point me to a link...

I have a branch office running off our centralized callmanager (5.x). The branch has a 2811 router, with 4 FXO ports connected to loop start lines and is configured for SRST. When in SRST failover mode the ip phones can call each other and they can...