IP Telephony and Phones

I read that the SCCP client for Nokia E serie phones is available. I didn't fount this client for download. Does someone where can I downlaod this clientRegardsPascal

Hi everyoneI have seen a couple of instances recently where the CUCME passwords (associated to Devices for TAPI) seem to have defaulted back to "NULL". I cannot see any reason why this has happened, and I'm not 100% sure that this has been the case (...

HiI have configured outlook to dial using Cisco phone. Each time user right click on contact to dial, he has to modify the number as it starts with +44... and then add 9 for external line.Is there way around to overcome this + sign.Cheers,shahid

CCM 4.2(3) --- 2821 MGCP --- Fragmented E1.ISDN status keeps dropping from Multiple Frame Established to TEI-Assigned. There are no errors on the controller or D-channel. When configured for H.323 the line stays solid!!Any thoughts?

I've got a 2800 GW that will be used in a CM4.1 system. The telco lines will be analog and have DIDs incoming. I'm assuming that means I'll need the FXS/DID VIC's for the 2800. Is there any VIC cards that will support outgoing along with incoming ...

Hi,I set an Inter-Cluster Trunk between my CCM and a PBX.If MTP required is not checked, I haven't audio problem but I can't hold, transfer...If MTP required is checked, I have audio problem (a "local" echo on H323 phone registered to pbx) and no pro...

I have a customer that require to split into 2 parts and hence I need to build a new sets of CCMs for them. I have the following questions tho:-i) For BARS, I would just want to backup and restore the CCM's config on the new sets of servers. Does t...

Hi guys,In some ip phones 7912 sometimes it shows 'CIA' instead of 'Your current optinos' in the display then the ip phone doesn?t show Missed calls and New voice mails. Can one help me with this issue?Thanks in advance

Situation:We are using Cisco VoIP and are sharing services with our tenants at our business.AT&T is our PRI provider and we PIC to MCI for our long distance (LD).Shared use tenants(Use our phones, but their LD of choice) phones are programmed to 1010...

Can I connect an Avaya PBX to the FXS ports on a VG248, or do I have to use FXO ports for the lines?

Hi,I have unity live record set up, but I have a few questions about it.1. When you are getting near the end of the record time, does you hear a beep or recording telling you it's done recording?2. If there is a beep or recording, do all parties on...

My network ->Analog line on Cisco 1751 as H.323 gateway.C2800 as gatekeeper.CallManager 4.1 with Cisco 7970 telephone.Receive a call on this line. At the 7970 place that call on Hold. Press Resume. You get no audio path and in about 1 minute you g...

The event log says, "The Cisco Telephony Call Dispatcher service terminated unexpectedly."Please give me a clue. thanks

The speaker phone specs on a cisco 7940 state that the speakerphone is full duplex. It doesn't appear to behave that way. For example, - user is using 7940 speakerphone for conferencing with other people, - user is talking, other people join Sprint...