MPLS

Dear all,I am working on setup for L2TPv3, My WAN connections are serials links and i need to implement dialer map on these interfaces.The xconnect command is applied on Ethernet interface to perform the tunneling, while the dialer map command is app...

HI NetPros,we are in the middle of a CPE evaluation process for a managed ethernet service.I just wonder what the community would suggest what way to go:- pure MPLS to the edge (we already have L3 services) but low throughput power- switch/pure ether...

Hi everyone,We are running a MPLS network consisting 70+ routers of 7600series. P - 7606-S/RSP720/12.2(33)SRD3PE - 7604/SUP32/12.2(33)SDR3I am getting high CPU in one of my P router due to TCP Listener process.xxxx#sh processes cpu sorted | exc 0.00%...

please help me, i am prepearing for CCIP exam and i have to pass two exams 642-691 BGP + MPLS642-642 Qosbut the CCIP will be retired after 27th of july so because of that is it possible to pass the 642-691 BGP + MPLS before the July 27th and after th...

Hello,I have 3 vlans 10,20,30 received on ASR 9k ingress and i need to forward these vlans to Firewall A and the vlans are remarked in to 20 40 60 respectively. These vlans need to be transported to ASR9k B using trunk interface then those vlans 20 4...

DearsWould like your assistance please regarding SVI-based EoMPLSBelow is a scenario where I saw SVI-based EoMPLS. [server] <---trunk--> SW-A <------ IP/MPLS -------> SW-B / SW-CSW-Ainterface vlan 5xconnect  --->> SW-Binterface vlan 6xconnect --->> S...

We are exercising MPLS ping and traceroute OAM functionality with a Cisco router.    One of the issues we are seeing is an unsupported TLV stack problem.    Has anyone else seen this, or is it a bug?When sending an MPLS Ping Echo request to a Cisco M...

With Amit DuttaWelcome to the Cisco Support Community Ask the Expert conversation. Learn to troubleshoot multiprotocol label switching (MPLS) Layer 3  (L3) virtual private networks (VPNs), to locate and resolve, Multiprotocol BGP  (MP-BGP), CE-PE rou...

                   Hi, please what is the difference between the ASR1002 XE ios and the 7206VXR IOS?is the commands same for both IOS ?and is all the feature for 7206VXR IOS available in ASR1002 XE ios?

Hi.I can see many versions of IOS that can support MPLS/L2TP/LNS for 7206.But which is the latest recommended?I am eyeing the following:12.4.24T7(ED)c7200p-advipservicesk9-mz.124-24.T7.binor 12.2.33 SRE6c7200p-advipservicesk9-mz.122-33.SRE6.binBoth r...

Hi all,I am trying to test VPLS by using ASR1k as PE and cat6500 as P router. The diagram looks like below:VLAN2 ---> CE-SW1 <--trunk--> PE01 <----> P01 <----> P02 <----> PE02 <--trunk--> CE-SW2 <-- VLAN3Config is as below:On both PEl2 vfi VFI1 autod...

Hi there,I have the following situation with dot1q tagged traffic accross an MPLS network:Customer trunk with different vlans(CE)----->dot1q-tunnelport with access vlan 83(PE)--->trunk with vlan 83 and some other(on same PE)---->Trunk interface with ...

Hi guys,i'd like to ask you.i've  a final project about "how to stream the video with mpls network", but  im confused in vpn n mpls configuration, anyone could help me? what  should i choose for vpn service? vll, vpls or vprn?here is my topology :the...