Hi,We have Cisco 7500 series routers. A lot of customers links are connected to the cSTM1-1 interfaces of the router. For this reason I have turned off the link up down trap but I need to know if there was a way I could generate a trap that would ind...
Hello,With a 6509 running CatOS, I am able to set an SNMP Trap Destination on the switch from a management station using the SNMP Set command. On a 6509 running IOS (12.2), I can no longer do this. Does IOS allow trap destinations to be set via SNMP?
hi well i am very new to cisco works .if any body can help me in getting some good ebooks on ciscoworks that will be very helpful to me .well in my lab i have 6 routers and cisco works cd one installed.can any body tell me what config on routers ...
I have a strange problem. One of our PCs will not connect to our e-mail server. This PC is on vlan 30. This PC has worked fine up until about a week ago. It can get to internet and seems to be functioning in all areas except e-mail. I can bring this ...
Hi guys,i want to know if there is a way of setting a Default Devices and Credentials...so each time i discover a device the Credentials will be right!!!Thanks!!!!
HiSyslog messages are not being logged from network devices to Ciscoworks server. My network is described below.CW-->vpn router-->VPN tunnel-->Cisco 3000 concentrator-->PIX-->network devices.There is nat translation being done on the Vpn router for t...
Dear All,I am using Ciscoworks Common Service version 2.2. for Solaris.What is the step to backup and restore all the configuration? Is there any impact during the backup?Thanks.C.K.
Hi,I'm having problems seeing cards (chassis) of my MGX8950 on Ciscoworks WAN Manager. At this point I don't know what to do to fix this. This was working before, but ever since a power outage happened it hasn't worked. Is this a problem with the ...
I'm trying to get Cisco View to work with a Cat4000 but I get the following message: "EndofMIBview value for module swversion.0" It works with the other equipment. What am I missing?
Hi, I'm new to the Cisco Netflow technology. I was wondering if anyone would be able to help clarify for me the differences between the term "packets" and "flows"?My understanding of the term packet and flow is as follows:1)packet:- data unit transmi...
