Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Resolved! Access

Hi, We have ASA 5505 and installed in the Production. Now we want to access the website by using Public IP from Server which is hosted in same server. Exp : The local IP of server is 1.1.1.1 and which is mapped with public IP 2.2.2.2 on ASA FW, now w...

ray_stone by Level 1
  • 1030 Views
  • 11 replies
  • 0 Helpful votes

I have attached my firewall config. I am replacing my Pix515 with a new ASA5510 and Im having some issues.First thing between the Inside to all other interfaces I know that inside can get to any lower Security interface.I am testing ping from DMZ to ...

jstabl by Level 1
  • 588 Views
  • 1 replies
  • 0 Helpful votes

We are using about 35 RV082 units in a very basic configuration - 1:1 NAT and some firewall ACLs. All the sites are talking to a central site and we just ran out of ACL space (RV082 supports 50 rules) on the central site.I presume that I can replace ...

clarke by Level 1
  • 1066 Views
  • 5 replies
  • 0 Helpful votes

Hello All,I'm Just confused about the Content Security License. i have ordered 2 ASA 5520 with CSC SSM modules for redundancy.the 2 ASA are configured for Active/Standby statful failover.My question is: if i need to order the following options (ASA-C...

m.samouka by Level 1
  • 432 Views
  • 1 replies
  • 0 Helpful votes

hello we want to implement a NAC solution for people dialing from home to HO then going to internet via our internet router. this router contains the security feature and is NAC enabled (we can see this from web interface) however, one cisco partner ...

ohassairi by Level 5
  • 463 Views
  • 1 replies
  • 0 Helpful votes

HelloIf I configure a second internal segment on a asa 5505, the outsite connection stops. Both the old segment (Van1) and the new segment (vlan12) don't work.Attached you will fid the configuration. Does anyone know whats is the problem?RegardsPasca...

keynet by Level 1
  • 628 Views
  • 2 replies
  • 0 Helpful votes

I'd like to apply a consistent signature policy across several routers using IOS IPS and managed by a Cisco Security Manager. I've created the new Policy, and the signatures are setup in a default manner. I'd like to perform the equivalent of the '...

I am looking at upgrading a 515E to 7.2(X) release but I am wondering about the memory requirements. The PIX in question has 64MB Ram/16MB Flash, UR and FO licensing. I keep seeing in the memory requirements that it needs to be a minimum of 128MB Ram...

wr3500 by Level 1
  • 1718 Views
  • 4 replies
  • 0 Helpful votes

Resolved! ACL debug

Hello,what is the difference between:1) %FW-6-DROP_PKT: Dropping tcp pkt ....and2) %SEC-6-IPACCESSLOGP: .....I know that 2) is about a packet matching an ACL, but 1) I can't figure what is it becouse I can't find any ACL rule that is droping my packe...

Review Cisco Networking for a $25 gift card