Nexus Devices

hi All, A Nexus 3048 is running NXOS: version 7.0(3)I3(1).Looking to upgrade to version 7.0.3.I7.10, and eventually to version 9.3.After seemingly succesful upgrade , the Nexus keeps running the old version.Details:Following this guide, which says to...

hiJust installed a n9k (9.3) in production and I launched a nmap to it (only tcp first) and :21/tcp filtered ftp25/tcp filtered smtp111/tcp filtered rpcbind161/tcp open snmp179/tcp open bgp512/tcp filtered exec513/tcp filtered login514/tcp filtered s...

Hello All, I have a EVPN VXLAN setup where Nexus 9K C93108TC is acting as a leaf. There are several servers connected with the leaf switch. We have some servers with 10gig NIC and some of them have 1Gig NIC. All the server with 10Gig NIC work properl...

Hi All,I am trying to enable netflow on a N9K-C9372PX switch but there is no "feature netflow" command...Anyone know why this is missing? Cisco Nexus Operating System (NX-OS) SoftwareTAC support: http://www.cisco.com/tacCopyright (C) 2002-2016, Cisco...

hi,I would like to know how to configure tracking interface with vrrpv3 on n9k.A (master) :interface Vlan1145no shutdownip address xxxxxx/26vrrpv3 4 address-family ipv4priority 110address yyyyyyyy primary B (slave) :interface Vlan1145no shutdownip ad...

HiI was checking the configuration guide for LACP on Nexus 9336c-FX2. Based on the information provided in this link, LACP load-balancing Hash is supported on the following items:Destination MAC addressSource MAC addressSource and destination MAC add...

I need to upgrade our two Nexus switches 7909 from version 6.2.24 to 8.2(6).Is it possible to go from 6.24 straight to the 8.2(6) or do I have to upgrade to 7.x first?Thanks!

I'm having some issues with a simple vxlan setup using static ingress replication. The Anycast vPC pair's VTEP doesn't seem to be responsive at all. I do not see any vxlan encapsulated frames being generated from either of these switches. No encapsul...

Hello, The scenario is as follows: NXOS 9.3.7 I am converting some code that manages a network to support NX-OS. config: vlan 133int vlan 133ip address 192.168.1.1/29 show ip arp vlan 133 shows: IP ARP TableTotal number of entries: 5Address Age MAC A...

Have a circuit being delivered that will have 3 vlan tags ie "QinQinQ". I haven't encountered this before so please excuse the ignorance. Can I deliver that transparently out another port? Or alternatively pop the outermost tag and deliver QinQ to wh...