I'm using cm 3.3.3 sr3, Communicator config copies my 7940 desk phone. All features described work on the 7940.Been playing around with this, everything works fine except anything that uses media resources. I can initiate an ad hoc conference, but...
Hi,We have one user that gets the "Not Enough Bandwidth" message on about half of his calls. None of our other users get this and all devices are in the same Device Pool and Location.Any ideas?Thank you,Erik.
During Upgrade of call manager I have an error message : Product: Cisco CallManager -- The Cisco Callmanager installation detected an unrecoverable error during database migration.You must revert to the original version of Cisco CallManager.For more ...
I have a 3725 as H323 gateway with a PRI connection to an Ericsson MD110 PBX. The PBX administrator is asking me to send different calling party number types depending on whether the outbound call goes to PSTN or to internal PBX extensions, for lin...
I want to buy a Cisco IP Telephony Solution (8 phones), but don't know what I really need to order. Is it necessary to buy and install a dedicated Media Convergence Server, or is it possible to run Cisco CallManager on a regular Windows XP PC too? Ho...
Admin Assistant (7960) and Director (7940) have director's primary line shared.With Assistant on the phone (asst's primary line), call comes in to director's primary line. Director reports that call rings once, then disappears.CCM SDI traces show th...
Is there any way to display CallingID and CalledID on all ip phones 7940 or 7960 which are members of a call pickup group ?Thanks in advance for any idea...on how to do itFred
I have issues regarding garbled characters on my 7914's. Each of my 7960 has 2 7914's. I have inline power from the switches. For this exercise, 2 out of 3 7960's have garbled chars on their 7914s. (both 7914's exhibit problems) I've read that it on...
Hello ,I have callmanager 3.3.3 at central site .I have CME 3.0 at the remote site.CME router ios is 12.2(15)ZJ3.Extensions at CME site is 4xxx and at central site it is 5xxx.These two sites are connected via T1.I want to test h450 call forwarding.On...
Hello ,I have a SRST site and I have programmed default destination .But what I ever do this is not working.Ephones which are not registered are giving busy instead of going to the default number programmed in the default destination command.Has any ...
When I'm trying to call a 11 digits number only the first 8 are manipulated and rest are stripped. So destination is not reached. What configuration i should make?Thanks.
Hi,I've CME 3.1 with IOS version flash:c2600-ipvoice-mz.123-7.T.bin.Auto attendant application does not work when "0" or no number is dialed. I've the commands:call application voice autoatt flash:its-CISCO.2.0.1.0.tclcall application voice autoatt ...
Hi All,I have a problem. I have 4506(Sup4) as my core switch and router. I have a 7500 router attached to int F2/3 and I have a pair of 3750 gig switches attached to ports g1/1 and g2/1. Ports G1/1 and 2/1 are configured as an Etherchannep group maki...
