I want to create an internal Voip (no outbound or inbound calls) just internal calls with Tele-presence.Does anyone see any issues with this using UCCM?ThanksDave
I want to create an internal Voip (no outbound or inbound calls) just internal calls with Tele-presence.Does anyone see any issues with this using UCCM?ThanksDave
This is more of an FYI than a question.I have been testing the Windows 10 Technical Preview. The machine has CUPC 8.6.4 installed. The build 10041 of the technical preview has broken the CUPC software.When I try to launch CUPC, I get a pop up windo...
Hi,we are testing a configuration in the lab.We have a Cisco 2821 IOS version 12.4(24)T8. CME is version 7.1. We are trying to upgrade software on 7941 ipphone. The phone is trying to upgrade but then thers is a "Auth Fail" error message on the phone...
The Hand used for holding up to get attention during meetings is way too small, doesn't get noticed if it is used by a meeting participant or notice by a participant that a hand even exists. It needs to be much larger and when used it gets noticed. T...
Hello My name is jerry harris and I am working on government Contract. We have a ASR1002 Cisco Border Element. We are using this device for call processing. We had an issue on march 16, 2015 processing calls through our Gateways. We have a Cisco Call...
Hi,We recently purchased a company and they are running an Avaya Voip system. I am wondering if there is a way to allow them to dial my Cisco extensions when they need to call this location until I can update their location to my Cisco system? I sho...
Could I please get the mounting hole locations on the bracket shown below. I am designing a mount for this mount onto steel, so the sheet rock (gypsum) option isn't going to work.
HiI need some help on expressway C and E certificates. I need to know which certificates are reuired on both the systems.What is the complete procedure to generate the license from internal Microsoft CA server and upload these certificates to Express...
Do the IP Phone 8861 models work on the CUCM 9.1 platform or will I need to upgrade CUCM to 10.x?
How do you collaborate with your coworkers? Join the #CiscoChat today & let us know: http://cs.co/60172JQH #SXSWi
I am working with unity 10.5 but and configured unity but when i use the mailbox its not asking for a pin instead its going to the generic greeting that goes like this "cisco unity messaging system from a touch tone telephone you may dial an extensio...
Hello,we want to purchase BE6K servers for our lab and use the Cisco VM planning tool (www.cisco.com/go/vmpt) to check possible VM deployments for the new platforms. On current BE6K-M3 servers, there are hard caps for the maximum number of UC applica...
Does anyone have a good recommendation for a good inexpensive USB headset to use for IP Communicator?Regards,Brandon
Hi,I have been told that to carry out a firmware upgrade on a C40 endpoint I need to connect a RS232 cable to the Comm port at the back of the unit, my question is can I make my own RS232 cable up using pins 2,3 and 5 or does it need to be a Cisco ma...
We have a TANDBERG 1700MXP and are having troubles with video. We can see video and audio fine but the other team can only hear us and no video is showing on their end. What could be the issue and how can i fix it? Thanks,Jay
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-21-2024 05:48 AM | ||
07-17-2024 05:55 AM | ||
07-15-2024 12:39 PM | ||
07-09-2024 04:24 AM |