Other Collaboration Subjects

Hi,I am trying to create a Policy-Map to use it at the ingress of a Fastethernet interface to be able to enforce bandwidth utilization and marking for incoming packets.One of my queues is used for VOICE. My objective for this queue, is to be able to ...

I am using Call Manager 4.0 with 60 IP phones & a 2811 router as a H.323 gataway for PSTN access. I am using route pattern 9! in call manager and deatination-pattern 9T in router.My problem is, when I dial any number to outside PSTN, the call is dela...

Hi,Having a issue where the IP Phone side of the call hears choppy voice (jitter) on some external calls coming in/out a MGCP PRI Gateway across WAN from the users. The PSTN (outside party) is fine and doesn't hear a problem.The users can call other ...

Hi all,what are the list of features that are not supported when using FXO's to PSTN rather than digital E1/T1, since as I know there are some features like CLID, RDNIS and calling name,... not supported, but I need exactly a list of all features not...

Dear TAC Member I have CCM 4.2 with Softphone and cisco 2821 with FXO ports.NOw when i am connected to my local area network and the softphone v 1.1.3.0 is registered with the CCM i can call anywhere ie to local extensions and outside (PSTN) through ...

Hi,In this version of AC we can import/export speed dial settings.I would like to know if this process can be automatic .I have a costumer that have an aplication that manage is clients contacts and can generate a file that he want to import in AC as...

Hi All,I've created a SIP trunk between two SIP Proxy servers (Linksys SPA9000) and can successfully call between the two systems but the caller displays as the proxy server instead of the phone, this makes sense as the proxy server uses it's own sub...

Hello,The CME 4.0.3 phone load compatability matrix http://www.cisco.com/en/US/partner/products/sw/voicesw/ps4625/prod_installation_guide09186a008071aeab.htmlshows multiple files for the 7911G and 7961G Phones.My question is what are the tftp command...

I want to change the logo of my phones 7912, 7940 y 7960. I use CCM 4.1. Anybody can help me?. Thanks.

Hi, I would like to configure diferent ringback on my phone. for example: if I have a "busy trigger = 2" first call will have a diferent ringback that second one.How can I do that?George

We have a customer who has 2 T1 that are being frought in via a T1 and state that once it's brought in they are setup for pots lines. We configured the T1 with many different type but cannot get a call in or out. Our dail-peer staements seem correc...

Does anyone have any info on when CCM 5.1 will be released? Cisco.com has the data sheets for it but it is not listed in the support download area or available as a selection from the dynamic configuration tool. Is the presence of the data sheet ju...

Another question, I use power over ethernet, is only sufficient insert plug rj45 in the lan port of phone? Sorry for my bad englishThank's

What characters are acceptable as sending a pause. In attempting to use the comma character it tells me that the specified phone number either contains characters that are not valid or is not formatted correctly. Right-click the arrow for the Dial ...

Hello, I want to implement Extension Mobility service. I have followed the setup step by step. But when I select my login/logout service, I receive an error "Login Insuccessful" Error: [6]. The IP Phone doesn't prompt me to enter my UserID and PIN. I...