If you see in the CDR Table on the CCM values such as b00210518004 for Original Called Party Number and Final Called Party Number, what does the "b" stand for? Shouldn't it be a like a phone extension number or a normal phone number. Why the "b"?
Could you kindly explain in more details which numbers does the below fields refer to. Attached are the full database tables. originalCalledPartyNumber b00210518004finalCalledPartyNumber b00210518004 We are investigating a call that lasted over 15...
Hello,Not sure if this the correct forum. Would like to know wether the Cisco ATA 18x product are the only ATAs that would function in t a Cisco VoIP Network. What compatible third party products, if any, are supported?Thanks,Carlos
Does anyone now if some features configured on the IP phone is not able to use or applied when the IP phone is moved to the different seating location in the office?I thought all the configurations are saved and retrieved from the CCM so there is no ...
Hi All,Are there any IPT Management solutions out there that actually manage actual call quality of ongoing calls??Sensors/probes or call simulators don't count. I know that Operations Manager can't do this either (it just uses probes/simulators).I h...
I have a user who is getting one way audio on his IP communicator when he is on wireless, but when he is wired it works just fine. Other users with IP Communicator are fine both wired and wireless. Any suggestions on what Windows/Network settings t...
Hi, I want to setup voip network to customer. which voip I have to implement SIP based or H.323 based. If it is SIP what are the required equipments? If if is H.323 what are the required equipments?Regardsskrao
hi,our customer having nearly 30 branches. 20 are connected to central office via leased lines.And 10 branches are connected by internet.Now customer willing to use voip on all these branches.That is From central office to leased line offices and in...
Hi all,I try to understand what is the different between 7825I and 7825H. I read through the Cisco Doc... cant find any different. All MCS78x5 has I and H... I couldnt tell the different also. Anyone know what is different??Also, I have old MCS 78...
Hello, I was wondering if this scenario is possible.Customer wants to do the following:Site1 2801 CCMESite2 1760 CCMEWe will have a vpn tunnel over the internet between the two sites.Can someone from Site1 intercomm another person at site2 over the ...
Hello all, I am configuring NAT for acessing a call manager and i want to know how can i assign the port to the call manager as i have one public ip address and i have five servers and one server is call manager server.I want to acess the call manage...
I have a client with multiple VG248's. This is a strange install as they have two line phones that have one rj11 using the two inner pair for one line and the two outer pair for the other line. Each line comes from a different VG248. Several of the l...
Does anyone have an example configuration or reference for the SEP<mac>.cnf.xml file for a 7970 using the new SIP firmware? I've looked everywhere but can't find *anything*.
I have added a subscriber server to create a cluster and set it up in the CM group as the 2nd server. I have the group defined in the Device Pool and have that device pool assigned to all devices. When I shutdown the publisher to test the failover th...
