Other Network Architecture Subjects

Maybe I'm just tired, confused, or both.Have multiple Cat 3524's, VTP domain, 2621 doing inter-vlan routing.Messed around with blocking VLAN's on a specific 3524 port. Test was successful. I changed the port config back to it's original state.Now, w...

HiSomebody knows where I can get the ios ver. 11.3 with voice features for MC3810?. Because I was looking in feature navigator but I found only from ver 12.0

Hello,I don't have any experience with CW, but I have to install VHM and connect to a remote DFM. I've installed DFM on a CiscoWorks Server and now I'm installing VHM on an another server, but I cannot find the "login-password" of the DFM I installed...

Is it possible to use HSRP to keep a redundant router/switch "in-synch" with the live router/switch, but not actually fail-over in the event of primary device failure?We have a situation where we have redundant Hardware, but cannot have the redundant...

Does anyone know if it is possible to always recieve caller ID information from a called number on an as5350 access server's PRI D channel whether it originates nationally or internationally? In essence, I need to know where a PPP dialup call origin...

Is there a way to configure a port as a SPAN port and also have it work as an ACCESS port?IOS 12.1-14EA1

My windows servers in my domain are in multiple subnets. This works out fine, but a problem does arise when using the "ip helper-address" command in my router to forward UDP broadcasts to the DHCP server from other VLANs than the one the DHCP server...

hi, i have 12 vlans but i have a trouble, my server in which the users logged in is in the vlan 1, and the hosts in other vlans can`t log in into the server.if i make a ping to the server responds ok, do i need to configure something else?i `m just r...

We currently have one routing switch with a VLAN Domain for each site. The sites are connected to the WAN via T1's. We are now connecting sites via GB Fiber. We would like to continue routing at each site using the existing 3550G-12's (6 sites). ...

i have 2 2621 about 2.5 miles apart with single mode fiber between them. currently i am using media converts to go from the fiber to ethernet is there a card i can put in the 2621s that will take the fiber connection?is there an easy place on ciscos ...

I am setting up a network linking different locations using 2 Cisco 2610 and 4 Cisco 1721 routers. I want to see the computers on the different locations when i browse the network neighbourhood. please help.

I am planning a network, and need to design it with an internal router, switches, and external routers to seperate my network from the internet. I do need to have some internet access, but I want to have complete protection from un-authorised intrude...

Hi, i'm having some trouble getting the 2950 and the 3550 into the devices.xml file. I have tried to uppgrade the device view but i did not help. My versions are:cd one 4th edition I have put on the patch!ANI version 4, no patch, can't find any!CM 3....