Other Network Architecture Subjects

Hi all,I'm doing routed access design with following:- Routing protocol is OSPF.- 3 layers with: Core/Distribution/Access design.- Core: Catalyst 6500E Sup 2T.- Distribution: ME 3800X / Catalyst 4500X.- Access: ME 3400E.We enable PIM from Core to Acc...

Hello all,I need some feedback regarding a network setup.A 1800series router is configures as an adsl router.It also carries 2 ethernet connections.int f0  is connected to my inside home network.(192.168.0.0/24)int f1 is connected to a mikrotic route...

Hi experts,i have designed high availability architecture (see attached file). Normally, the final implementation woulh let people int the remote network to access serveur in the access layer and access layer servers should be able to send packets to...

Hello,Just wondering if the below design is recommended for an optimal and successful vmotion.                         DC-1                                                                                                     DC-2(n x ESXi)-------(2 x ...

I'm re-designing a couple of wan sites.  I'm using EIGRP over both some leased dark fiber and p2p provider connections.  The attached (pdf) physical topology says it all, I'm thinking of using ip sla to track and inject routes over prefered connectio...

All,I'm in a situation where I already have GRE tunnels connecting one environment to another.  One of the physical layer connections between a tunnel endpoint and an intermediate device is going to become a shared medium between two different compan...

Hey all, we are upgrading to a Cisco network and wanted some input on our possible network design...Currently we have:A Juniper SSG 140 and IDP for our firewall and IDS3com (layer2/3) switches for our desktops2 Dell PowerConnect 5424 switches for our...

Hello,Can you help to recommend a Cisco router model that can support 50-60 PfR connections that we will put in the hub site?I think it is local to the branch router and irrespective of the PE (HUB) device, is that correct?Thanks,Deepak

  Hi, I tried to implement the following class-map/policy on a sub interface on my 7604 running IOS c7600rsp72043-advipservicesk9-mz.151-1.S.bin:class-map match-any Citrix_PCoIPdescription QoS for Citrix and PCoIPmatch access-group 112class-map match...

Hey,does anyone know of issues with running a BERT test on these new V3 WIC cards. This is running on a 3945.When running a BERT test I cannot see the BERT total k bits increasing, even though the BERT is set and running.See below: (This is only an e...