I am constantly seeing "EM Event: Id:5048, Line#2631:Try to query an invalid ppp : bay.ppp = 0.511" messages in MGX-II on my MPSM-155 card. I don't see any impact but anyone has any idea?
Hi guys, I was wondering if I could achive path redundancy for xot. Assume that I have network redundancy configuration (2 routers at each site) at a couple of sites. A node is connected with a primary and seconday serial interface to both routers at...
HI Pradeep,. There are three router A, B, C. A router having internet access and router A to B one Point to point Leased line, Router B to C one point to point Leased line. Router C One default router Ip route 0.0.0.0 0.0.0.0 router B interface IPRou...
Hi,I am having a very strange situation at a client site where i have recently installed a IP over Frame-relay for Internet Access for LAN users. the configuration of the IP/FR has been done on a cisco 805 series router. the weird thing is that i can...
Hi All,Just want to clarify something regarding EIGRP interface-passive command. I made serial0/0 passive in eigrp, but i can still routes passing to the serial link. Do i need to make the serial sub-interface passive rather than the serial interface...
I am having trouble getting a 1841 with WIC-1T to work with a t1 line. I had 2501 setup the same that works fine. Here's SH INT for 1841. Currently not connected.Serial0/0/0 is down, line protocol is down Hardware is GT96K Serial MTU 1500 bytes, BW...
i m trying to block the youtube on my network. I have confiugred the following things on my internet router.class-map match-any youtube match protocol http url "*youtube*"!!policy-map p2p class youtube dropinterface GigabitEthernet0/1ip nbar proto...
Hi all,Somebody can tell me if I can upgrade ROMMON version 870_RM_ALT.srec.123-8r.YI4C85x/C87x ROMMON Upgrade; Adds ADSL2/2+ annex M (C877M) supportTo router version list bellow? If yes, how I need proceed?------------------ show version -----------...
Dear Firends,I am trying to redistribute some static routes int to ospf - it's happening siccessfully."redistribute static subnets"The same redistributed routes again im redistributing into BGP.- This is not happing." tried with all possible ospf to ...
There are lot of online tools that help measure the ideal time it should take for a particular size file to get downloaded based on the link speed. But these generally does not factor the latency if it exists between the source and the destinationfor...
Right now, I have 2 3662's with channelized T1 cards in them, running about 22 half T1's to the branch offices. I'm looking for a replacement router that can do Channelized DS3, to grow these offices to full T1's. I was looking at the 2851, but ...
When connecting an Octal cable's 68 pin connector to the asynchronous serial port on a 2520 series router how are the 8 RJ45 connectors attached to routers on the other end. If you wanted to setup the 2520 router as an access server for reverse teln...
I am analysing a TCP Chat between workstations and a HTTP server (172.23.22.205).I have noticed that some users have gotten problems to access the HTTP Server. So slow to put or get image files.The communication way is the following:Workstation -> ro...
Hi,I have this Cisco 837 DSl router at work which provides 'guest' access to users in one of our offices. I was wondering how I can give myself remote desktop access to a pc on the guest network over the internet assuming my publc IP is 1.2.3.4.And ...
Hello,I am looking for a cumulated list of all cisco eos/eol products including eol/eos dates to import this list preferably automatically in our config database.Does anybody know if such a list exists in cco?Best Regards,Thorsten
