Routing

I have a minor issue I need help with.We have installed some dsl and cable modems at various remote sites and are running GRE IPsec tunnels over the connections back to our HQ. These are always up connections using EIGRP, that take over if the prima...

PaoloWhat took you so long !!! :-)Fantastic achievement Paolo and i hope you continue to inhabit these forums for a long time to come. Many people, including myself, have benefitted from your participation.Jon

We have a consultant in who is trying to get us to replace our PIX (we're open to an ISR or ASA on the edge) with ISA. He claims ISA handles Exchange and Sharepoint portal features better than a Cisco devices can.Does anyone know of some good compar...

Hi All,Please help me on this we have 2811 router version 12.4(13r)T. There was four emptt HWIC slots on this and we need to add WIC-1ENET on existing HWIC slot. After connecting into WIC-1ENET into HWIC slot router not detecting the card.Please help...

Hi,I need your assistance,I support a kind of network that has two separate links to each site-one of the links is known to be more reliable than the other,There is some particular kind of traffic that is more critical than all other traffic.It comes...

How do you copy the log files off a 506 content engine,I keep running the following command(transaction-logs export ftp-server *.*.*.* username password) on my content engine still not receiving the logs on my ftp server. ftp export is enabled and i...

Hi All,I got a doubt in OSPF rather simple. OSPF runs SPF alogrithm for all the prefixes including Intra-area, Inter-area and External routes. or It only runs Intra and Inter Area. ?thanks in advance

Hi AllI have a 2811 with 2 ADSL cards that are bundled using MLLP. Problem is the internet connection frequently (every couple of days) seems to slow right down almost to nothing, I get intermittent connection to the internet and struggle to telnet r...

sir,plz. help, how to Binds an ip to a mac adress in cisco IOS.Regards,Tarun

On my edge routers I have setup traffic classification on the LAN ports and queuing and prioritization on the output (WAN) ports. My question is what do I do on my distribution and core routers to obtain end to end prioritization? We use a lot of vid...

We purchased 877's instead of 871's and now we are stuck with them (long story). In an effort to put them to use, can we disregard the DSL, connect one port to our LAN (for internet access) and get access on the other 3 ports and the wireless?

We have a service provider MPLS network routed via BGP on the WAN side and redistributing these routes into EIGRP on the LAN. Currently we have only 1 Internet POP in the United State. We are in the process of adding an additional Internet POP in E...

Hi All,Will Router CPU peaks, when the DRAM is fragmented and largest contiguous block is very less? Currently i m having a NPEG1 with 256 MB DRAM out of which 41MB shows as free but the largest available block is 1 MB.thanks in advance