Switches - Small Business

Hi,  Could you please tell us if "Port Intelligent" feature supports the detection of any mac address OUI on the default VLAN? Seems not on the doc as it says it's works for phone OUI and voice VLAN.Would it be available for default VLAN or user VLAN...

Hi, I have never configured a switch before, and I am looking for help configuring my 200 series Smart Switch using residential cable and then connect it to two wireless routers.  I can access the web GUI for configuration and now need some guidance ...

hello guys, newbie here... i have a little question. how can i turn a stack mode into standalone mode using GUI or CLI? im using a sg200-26  smart switch. thanks,

I have a new SG300-52 Switch Serial Number DNI180701Q0.  The current firmware version is 1.3.0.62   I see that the most current firmware version is 1.4.5.02; I understand not to make just one jump in firmware. Would you please provide a recommended ...

Hi, We are having major performance issues with two brand new SG500XG-8F8T switches. They are operating as iSCSI only switches towards one Nimble CS300 array (SAN) and one Dell R430 server (Vmware 6). When we connect everything we have link on all p...

I have a SG300-10 as stated that is 6 weeks old !  First reboot was done last night per instructions in order to enable jumbo frames.  Enabled jumbo via gui, saved config, reboot and it never came back.  Google search shows this same issue with other...

Hello, In my current setup i need traffic coming into ports from my Vlan 3 with IP like 168.133.1.xxx to access data on my nas that located in Vlan 4 with  an IP 192.168.4.100 All ports are set as Access ports.  The switch is setup to have an IP i...

Hi, I am trying to get a "SF300-24PP 24-Port 10/100 PoE+ Managed Switch" to talk to another SF300 switch to connect more Cisco SPA514G phones. I already have two SF300-48PP switches which are hosting phones but I cant can a third switch to work. I...

Hello. Let me first present you the case I am having IPTV boxes, that needs to be on single vlan per IPTV box. SG500 is on router mode SG 300 x2 are on switch mode SF300 is on router mode (as I have 1 vlan /port, SG500 cannot handle more than 256 vl...

Hi All, We have branches in multiple locations across Geographical areas and established connectivity between the branches, using Ethernet Point-to-Point leased lines from local ISP's. Same way, we have Multiple links from multiple ISP's between our...

Hello, I failed to connect  sf200 48 switch with CoreSwitch 4500e  GE1 Connected to GigabitEthernet1/11 But  client ip 169.254......... SF200 configuration: 1- Creat VLan Vlan Id: 22 Vlan Name: Vlan 22 2- Port to vlan Vlan ID: 22 Port E1: Tagged 3- G...

Hi. First time posting on here. I'm in Industrial Automation and a problem I'm investigating has lead me to the link between 2 SG200-26 switches. Both are "SLM2024T-UK" and FW v1.3.0.62 I'm seeing between the two the following errors... Switch 1 ...

Hello I have this setup on a Cisco switch port: interface fastethernet24storm—control broadcast enablestorm—control broadcast level 10storm—control include—multicastport security max 10port security mode max—addressesport security discard trap 60span...

SG500 52 Port Switches Newbie here! What would be the issue is certain ports, which are set with a VLAN of 3 are giving out the correct addresses through the DHCP, but when another port, which is set to VLAN 4, when a device is connected, is giving...