Switches - Small Business

Hi Cindy,I have a question about the SD2008 gig switch i have. it isn't functionig properly. When i connect my computer to the switch no led lights up but when i connect it to my sd208 it works. my computers have gig ports that is the reason why i up...

Hello folks. I'm new to the Cisco forums and new to Cisco switches. We just purchased 3 new SGE2010P's and 2 SGE2000P's last week and delivered on Monday.It basically boils down to this. After configuring the system time and hitting Apply and the sav...

Hello, We are in an organization of 80 users with 5 Sx300 series switches with the latest firmware (1.2.7.76). The network is mostly flat with all switches feeding into a Cisco ASA5505 acing as the primary gateway for Internet Access. Only our two 48...

Hello,We have been expereincing terrible LAN speeds thoughout our network and instead of complaining, it;s time to get off my butt and see what tools or functionality our SG200-50P can provide for us. It's very frustrating not knowing where the slowd...

hi, I am running the SGE2000 as my l3 core switch with multiple inter-vlans.have a customer requirement that needs to restrict eg. GUEST-VLAN10 to all other VLANS in the network.Only allowing access to the internet.It seems on the switch i am able to...

i have an sg300-28 running the latest firmware, and would like some insight on port-channel options.  below are the port configs i have for a LAG to my router.  i am currently using 802.3ad with LACP.  my router is a linux machine pulling duty as a b...

I recently purchased an SG300-28P.  I have 2 VLANS/subnets that are successfully routing between them.Machines on both sides can ping each other just fine, but none of the usual Windows/NetBIOS browsing is possible.  I've recently learned that NetBIO...

Hello Every one i have some help needed I have a cisco Swtich SGH 300-20 Gigabit switch i configure 2 vlan one is default and one is vlan 10 Vlan 1 ip range  172.16.0.0/23Vlan 10 ip range 172.16.2.0/24Client on Vlan getting Proper IP from DHCP Server...

I have port-channels configured and working for the native VLAN on multiple SGE2010s. I now want to add multiple VLANs and enable trunking for the port-channel. I am not clear on the appropriate way to enable trunking as it can be enabled on the port...

Hello,I have a Linksys SGE2000 Switch and I've been trying to   get Vlan's to work.How I'm trying to setup is like thisPort 1 - Vlan22 - Plugged into trusted port  in firewallPort 3 -  Vlan25 - Plugged into DMZ in firewallPort 15 -  is plugged into a...

Hi there,Can you please advice on packet buffer size on ESW switches, particularly esw-540-24p-k9? Cant find anything on datasheet. Thanks in advance!

HelloI have have issues with using mutlicast stream with this device with following configuration:[ Uplink/Internet ] ------L3_link------- eth0_[ router (linux + PIM daemon)]_eth1 ====trunk==== g1_[ SPS2024 ]_g2 ----access---- PC- there is router on ...