Hi Folkshow to trace and fix and troubleshoot the below outputSTANDBY-3-DUPADDR: Duplicate address 192.168.0.23 on Vlan23, sourced by 0000.0c67.dc00thanks
Hi networkers!Here is an scenario example...The problem is with EIGRP route decision.EIGRP always looks at the outgoing interface speed of a router for selection of the best route.In my case, R1 goes directly to R3 because of 50 Mbit outgoing bandwit...
Hi,I will be configuring a 4503 (native IOS) and wonder what the major differences between that and a 3750 configuration might be? Any specifics or generalities will be appreciated.Thanks.
Hi allI hear there is a way to work out the correct burst rate when configuring policing on a switch, for example, if I wanted to police traffic to 10 Mbit on my switch, how do I work out the best burst rate to use ?cheers
Hi all,I have an IP address assigned to fa0/1 on the router which is connected to my core switch. Do I have to assigned another IP address for vlan 1 on the router? what's the use of vlan 1?Here's my network:VLAN 1 = 10.65.0.0/24 (Management)VLAN 2 =...
Dear Gurus,I have one cisco catalyst 3560 switch. I configured 5 vlans in the switch.All vlans are communicating fine. Here i like to use one DHCP server.I placed my DHCP(windows 2008) server in vlan-1 and all my hosts are placed in different vlans...
Hello,i have a porbably weird scenario in front of me, my client needs the LAN subnet of their 2 WAN routers currently running 2 HSRP groups to failover when there is a failure in the lower level packet shaper device (Transparent, L2). Interestingly,...
We have a 6509-E with a FWSM. I am looking for some help on how to connect our transparent Proxy appliance so that it is inline with the switch and firewall. Below is the logical path that I would like the data to take. Because this is a transpare...
I Have WS-C2960S-24TS-L And WS-C2960S-24PS-L And I Want To Stack Between Them!! Can I Do This ?!They Are Compatible Toghether Or Not ?!!Can Any One Help Me?
I'm getting lots SNMP Authentication Failures Traps from my N7K (10.1.1.100). Unfortunately the trap doesn't contain information the origin (who was trying to communicate with N7K).Time of Trap: 07:54 AMIP Address: 10.1.1.100Trap Details: snmpTrapEnt...
So I work as a tech for a large company and at the site that I am at my team and I are trying to get the general manager to approve some additions to the network infrastructure, mainly to allow us to add on to our access-level switches and remove all...
Hello all,I have a 2900 series router with SM-ES3G-24-P service module(24 port switch).In the switch module I have created 2 Vlans,port 1-12 will be in VLAN-1 and port 12-24 will be in VLAN 10.in port 1-12 end systems will be connected who just need ...
This is using Packet Tracer 5.3.1.0044 emulating a Cisco 2811 router.Apparently, I'm using the command wrong because this is the output I see:Router1(config)#interface fa0/0Router1(config-if)#ip classless ^% Invalid input...
