Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, November 4, 2024 through Friday, November 15, 2024. Our colleagues Rohit Chopra, Vaibhav Aggarwal, Anuraag Majumdar, Saquib Zeya...
Forum Posts
My switch (2942XL, 12.0(5)WC15) has a behaviour I cannot get my head around. Maybe I am missing something trivial.I have a server connected to an access port on VLAN 1. That works OK. (Let us not get into a discussion of the merits or otherwise of...
Hi allIs it possible to block workstations on a lan from seeing the HSRP messages going between the routers? The scenario is 2 x 7200 routers configured for HSRP each connected to a 2950, which are in turn connected to each other.Thanks, Henk
Guys, Can you help.In the type 5 (hello packet) there is another eigrp release version 1.2 apart from the version 2 in the same header.This version 1.2 does not appear in any other eigrp packet type, so can I assume this is the revision of the hello...
Whats the best way to connect 2 4507 switches? I need to connect 2 so that we can have redundant switches. Is there a special interface and cable that will give me very high bandwidth?If possible could you detail the parts needed.All posts rated.Th...
guys, i have a net with 3 pc 's at my office with an internet connection via adsl. I also have 1 pc in my house. How can i get connected remotely so as to monitor the office network.( details pls)
I understand that when you are going to summarize from your two distro switches against the core network, you are requered a layer 3 linke between the distro switches. But if you dont have this posibility and have to use L2 can I just skip using summ...
HiiCan any one plz tell me that what actually happend during booting process?(i)what is the significance of config register(ii)where the configration file & IOS image saved ?(iii)is that both can be saved on same place i mean flash or bootflash, I j...
Dear All,I am testing the sup1A in my test bed with only chassis without any line modules. I am getting the following console errors.I have ios image and bootldr in the pc card (slot0:) From sp Rommon after the cmd "BOOT=slot0:c6sup11.......... " it...
HiIf I fromate flash in running router and not boot the router then any problem ?.my intend in running way at first i formate and load another image.ThanksBiplob
we are using switch 3560.. our switch is running on network 192.168.4.0 but. sm server we want to attach it is from 192.168.5.0 series , now what we want at switch is that we take one switch network series ip such as 192.168.4.7 & implement NAT to c...
6506 sup1a image corrupted, downloaded image via console after downloading, sup1a uncompressed the image but failed with this error:Uncompressing file: ######################*** TLB (Load/Fetch) Exception ***Access address = 0xfffffdc0PC = 0x8001060...
Hi,Can you connect 2 switches with different native vlan? For example port gi1/1 on switch A has native vlan 1 and port gi 0/1 on switch B has native vlan 2. Please refer interface snapshots to below.The ports connecting switch A and switch B are a...
Just wondering if there is a way to force RIP to prefer one FE int over another(By default(From memory), I believe it prefers the Int with the highest #? i.e. so fe0/1 would be preferred over fe0/0(If both have the same hop count)?
Howdy,Can someone provide me a link for documentation on how to set up my Catalyst 4506 for HTTPs so I can connect to it using CNA
Hey all, I am working with the 3650 series switches and none of the books or places I can find have senarios for me to do. Does anyone know within cisci site or a 3rd party that will give me labs and such to practive up on?
