Activity in Technology and Support
How to Set Speaker Mode as the Default Camera Mode Instead of Dynamic
We have a Cisco Room Kit codec, and we would like Speaker Mode to be selected as the default camera mode without requiring any manual intervention.Currently, Dynamic Mode is automatically selected by default under the Camera Control options on the To...
CW9176I – 6 GHz SSID Not Discovered by Windows Wi-Fi 6E/7 Clients
We are testing 6 GHz on CW9176I APs running MR 32.2.4 and seeing an issue with Windows clients discovering a 6-GHz-only SSID.Test setup:6 GHz onlyWPA3 enabledPMF enabledRADIUS excluded for isolation testingResults:6 GHz-capable iPhone → SSID visible ...
Secure Access Change Log for 2026-08-07 to 2026-08-13
Cisco Secure Access Change LogRelease window: 2026-08-07 to 2026-08-13SummaryPrepare for new Secure Access IP rangesEnhanced Do-Not-Decrypt experienceDetected file type in Activity Search and EventsIsland Enterprise Browser integrationIn-product supp...
Resolved! Lost access to duo mobile
I formatted my mobile phone now I don't have excess to my duo mobile and on top of it I don't have backup code due to which I lost my excess to Instagram
Upgrade ISR 4431 iOS 17.3.5 to 17.9.10
Hello,Can I upgrade from 17.3.5 Amsterdam to 17.9.10 Cupertino on my ISR 4431?CPLD Version: 19042950Rommon: 17.6.1AIR-GAPPED routerCurrently Bundle mode, I plan switch to Install modeAnd what about the Smart licenses? any restriction if I don't regis...
Failure to recover during an IPsec switchover
Traffic from Server-1 to Server-3 is encrypted using a policy-based IPsec tunnel between Router-1 and Router-3.Router-1 and Router-2 are configured in a redundant setup and share the same VPN endpoint address.The system is configured so that when Rou...
AMA - 2026 IOS XE Software Security Hardening update
Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Resolved! Co-Term Licensing Help: MX65 to MX68 but MR36 Replacement on backorder
We are a nonprofit replacing an older Meraki deployment through the Cisco/TechSoup donation program and I'm trying to determine the correct licensing sequence.Current co-term organization:- MX65, Enterprise licensing- Two MR33 APs- Existing licensing...
Allowing specific Ip address from VLAN with extended ACL
Hello everyone,I'm currently continuing my Extended ACL lab, and I have a question.How can I allow a specific IP address within a VLAN 30 (IP address: 192.168.30.10) to access another VLAN without allowing that other VLAN to access the specific IP in...
Resolved! SDA Wireless Client Roaming
Hello,I am trying to clarify a little doubt. Considering that I am using SDA with LISP Pub/Sub Model, when a client roams (either Wired or Wireless), is the CP going to publish the L2 and L3 Client address+ new RLOC entries to all subscribed nodes (t...
How can I have OpenDNS release my IP address
Somehow my OpenDNS account settings got scrambled. I reinitialized my account, but the system won't let me set my network IP saying Network already exists. How can I get the system to release my IP so I can add the network again?
Cisco Spaces in Practice - What No One Tells You
Introduction In the previous three articles we covered the architecture, sizing, AP placement rules, design validation, and controller configuration for Cisco Spaces. This time we take everything into a live production environment — a hospital (ex...
UCCX 12.5 Caller not placed in queue if no agents avaiable
We have a application/script that if there are no agents available the call is put into the "queue" step but is never answered even if an agent becomes available. From the Finesse interface the call is never placed in the Waiting Calls column. If a...
ASA 1010: using an ACME certificate from a provider not LetsEncrypt
Has anyone used the 9.23+ firmware and got auto renewing certificates to work? I tried to set this up on an HA pair and although it allows you to try, the GUI and CLI are missing the commands or fields to input details such as the External Account B...
Resolved! Unable to register Catalyst to Meraki - DNS fails due to VRF
Hello, I have a C9300-24P running IOS-XE 17.18.03 that passed the Meraki compatibility check, yet the registration is failing, because I am managing the Catalysts via the dedicated Management Interface (Gig0/0) How can such a feature not support the...
| User | Helpful Count |
|---|---|
| 89 | |
| 51 | |
| 49 | |
| 36 | |
| 36 |
