Activity in Technology and Support
Posture assessment report never finishing
im trying to run a scheduled report for posture assessment by condition filter last 7 days. first one I scheduled after 48 hours it was still listed as "in progress" created a TAC, engineer and I went through root to clear out the jobs. Set the j...
"IP Address Theft" Dual Band WiFi Speed Boost
Subject: "IP Address Theft" Dual Band WiFi Speed Boost I encountered a recurring issue in enterprise Wi-Fi setups involving Xiaomi devices. When the Dual Band WiFi Speed Boost feature is enabled, the device connects using both 2.4 GHz and 5 GHz radio...
SDWAN - configuration push
when I pushed the configuration from manage, it has been pushed the OSPF configuration but rolled back to default with in 3 mins without any errors.please share your suggestions to troubleshoot. I am new to SDWAN
ERROR: priority-queue not supported in unknown interface
Hi - I'm running ASA 9.20(3)7 on a FPR2110-ASA-K9I'm creating some QoS policies, some of which need priority set.However, when I try to add "priority-queue INET" I get an error message: "ERROR: priority-queue not supported in unknown interface"I don'...
GA Release of Trusted Network Detection for Client-Based ZTA
We are excited to announce the General Availability (GA) of Trusted Network Detection (TND) for client based Zero Trust Access (ZTA) in Cisco Secure Access. This feature empowers administrators to configure Cisco Secure Client to automatically pause...
Packet Tracer Login Issue in Mac
I am using Cisco Packet Tracer in Mac and when I tried to login it's keep loading for a long time and no result, I am having this issue since last 2 days. However, if I tried to login netacad.com directly using browser it's working fine but the Packe...
FTD 1140 displaying [missing en-US:undefined] Module Compilation Error
Hi,After upgrading FTD to version 7.4.2.2, a critical error appears. missing en-US:undefinedModule Compilation ErrorIs there any way to fix it?
WLC 9800-L version 17.12.4 and Microsoft surface connectivity issue
Hi,I successfully migrated from Cisco Airwave OS to 9800-L IOS versoin 17.12.4, and everything is working fine with the exception of the Microsoft surface pro. All of my PCs (windows 10) and Apple Iphone devices are working great and they are using ...
Understanding MST Convergence
Hi All, I have the following setup in CML: SW1 is the Root BirdgeI have VLANs 1-20All Switches have the same MST configuration and running in the same region. When I shut down interface gi1/0/3 on SW3 the MST environment converges and uses Gi1/0/6 a...
Azure Packet Fragmentation
Hi all,We deployed ISE in Azure back in March (version 3.3.0.430) with the following setup:- 4 x ISE servers (PAN/PSNs)- ExpressRoute from on-premise to Azure- Meraki APsWe noticed we have hundreds of clients stopped responding errors every day and w...
Group call pickup on CUCM for 3rd party SIP Phones
Good day, has anyone had experience implementing group call pickup on third-party SIP phones connected to CUCM?I read somewhere that Cisco specifically does not allow this function to work on third-party devices and only on its own, is this true?
Resolved! CISCO 9200 "No space left on device"
Hello,I am trying to update a cisco 9200 switch ( in fact, it's a stack, there a 2 switchs).Switch Ports Model SW Version SW Image Mode------ ----- ----- ---------- ---------- ----* 1 32 C9200-24P 17.06.05 CAT9K_LITE_IOSXE INSTALL2 32 C9200-24P 17.06...
SSID "found on New Location" Message after Upgrade
Hi Team, after Software Upgrade to 17.15.3 at 9800-40 the Customer complains about a Message, that says that the "Network is found at a New Location". Does anyone know why this occurs, since nothing changed in Config or AP Location? And when will it ...
Resolved! Custom ringtones with Yealink SIP phones and CUCM 10.5.2
Good day, I encountered such a problem. When using Yealink phones via SIP protocol on CUCM 10.5.2, I cannot change the ringtone of incoming calls on these phones. I change the global ringtone of incoming calls in the device settings, I change the rin...
route tag command on interface
Hi GuysI saw an ISP router interface the other day with a route tag applied to the interfaceipv4 address 192.168.1.1 255.255.255.0 route-tag 5 commandWould this have been a Cisco router? if so what IOS? I've never seen this command before on an inte...
| User | Helpful Count |
|---|---|
| 93 | |
| 87 | |
| 74 | |
| 70 | |
| 68 |
