Cisco Software training materials and resources for Enterprise Agreements, Smart licensing and Smart...
4610 PostsEngage with your peers and Cisco about enterprise-class technology tailored to small and medium-size...
223 PostsEngage with your peers and Cisco about collaboration products such as contact center, IP telephony, ...
216548 PostsConnect with other Cisco technology experts on topics of automation and programmability of Cisco pla...
27930 PostsProfessionals using or considering Cisco data center technologies can join the conversation to discu...
43362 PostsCollaborate with your peers and Cisco on all areas of IoT to discuss what happens when the internet ...
243 PostsCollaborate with peers and Cisco on all aspects of your network, including Cisco Digital Network Arc...
290028 PostsFind tools and resources to streamline your service and parts logistics questions, technical documen...
8237 PostsExplore the security forums and share your expertise about firewalls, email and web security, Identi...
201779 PostsExplore information and join discussions with peers and Cisco about Next-Generation Internet, MPLS, ...
17269 PostsInteract with peers and Cisco about Cisco Services including design, analytics, CSR and ServiceGrid,...
5637 PostsExplore what Cisco has to offer for your small business IT needs. Learn from your peers and Cisco ex...
42553 PostsConnect with peers and Cisco on all aspects of wireless tech including security and network manageme...
58091 PostsHave a look at upcoming events and register for one that interests you!
3884 PostsHello all.In the current Cisco Unity Connection setup, I have 11 users with Basic licenses. I have now purchased 11 Enhanced licenses. How can I migrate the existing users from Basic to Enhanced.Please help!
I'm using IOS/IOS XE, EIGRP Named mode. I've been tasked to find a solution for this following topology:There are two edge routers (R14 and R15), both have static default route, both need to advertise it via EIGRP. R14 is connected to R3, R15 connect...
Also sorry, english isn't my native language so I tried to translate the assignment as best as I could.I only managed to do the DHCP server & I am not sure if I did it correctly or not. Because I tried other things like doing the ethernet channel but...
how do I fix the ISE 3.3 configuration for the self registration portal because the portal redirect is successful on the client but does not display the page status can't be reached or interrupted
Hi, looking into key chain commands over IOS/IOS XE I see that under the key, for example key 1 I can config the cryptographic-algorithm. yet - I don't fully understand where does it take place. to run a test I used the following configuration on all...
Recently need to upgrade C9407 Current version: 16.12.03aTarget version: 17.9.6a Supervisor 1 XL Module with 25G FW: 16.12.2rCPLD: 19032905 Two 9407 SVL units---Can't find the upgrade path in official documentation?Can we upgrade directly from 16.12...
im not trying to beat a dead horse, i have googled, and tried several things. it seems once the codec is registered via the 16 digit code local web access is blocked until retstored through the webex control hub. i aquired a sx80, fr it, loaded newes...
Hi there,I am using packet tracer and I have an issue with area A talking to area B or area B to area ACloud is configured to use modem4 to Ethernet6Server has DHCP on and can talk to router and other PC in area A but not area BArea A inside IP is: 1...
I configure both cores (1 & 2).Create a VRF for each int VLAN.And default route for each vrfBecause router connect to Core1I create on this router two sub-ints, one for vrf DMZAnd another for Inside-ZoneSo the default route for VRF DMZ, inside each c...
Dear Experts, I am facing an issue with CUCM 12.5 utils ntp status unsynchronized, how ever i am using ISR4431 as a NTP server and windows server 2016 as a NTP source for ISR4431. But due to windows server using its local cmos time as time source to ...
Installed CML free version, and then downloaded the Refplat file (refplat-20241016-freetier.iso), and mounted CD and then from the CML 2 System Maintenance Controls pressed the Copy Refplat ISO button. Saw messages that showed files being copied, af...
%SIP-3-INTERNAL: TCP_SOCKET_SEND_BLOCKED: connid= 1073, local_addr=, remote_addr=10.112.0.135, remote_port=5060 - All retries are exhausted, deleting pending messages Has anyone ever seen this specific error before in syslog? I couldn't find anythi...
Hello, I would like to report a false positive. Product: OpenDNS Home DNS URL: https://urlquery.net (or the hostname itself) Detected as: MaliciousThis website is legitimate. Thanks.
Hi guys .The SOC administrator in my department told me that, for the purpose of securing the network, I should disable the password recovery service so that no one can access the switch configurations just by having a console cable. But I’m not sure...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
User | Helpful Count |
---|---|
83 | |
81 | |
72 | |
63 | |
61 |
User | Count |
---|---|
34 | |
30 | |
27 | |
21 | |
16 |