Hi, I have a doubt about the IGMP query interval. We experienced some problems regarding multicast behaviour in our network after we have configured the IGMP query interval at 30 seconds. Anyone could tell me if could be problems when I configure tha...
Working on some web page feeds into my DMP's. I am not having any luck in changing either the font size or the font style. I can see how to change the font size for a static text but not the font style. I also want to choose a font size and style ...
We have a mixed number of users that are having issues where the CDPdriver.exe is eating up half the processor. We are running 2.1.1.0. Has anyone seen a fix for this?Thanks
I have a multisite configuration with a mixture of CCM and CCME.HQ: CCM 5.1.2 (Cluster) w/ UNITYRemote Site: CCME & CCME UnityHandsets: 7971regardless of WAN infrastructure, do we have the ability to do point to point (1 to 1) video calls?We do not w...
Hi everybody,I have a problem. In my recent queue report I realised that there are calls that stay queued for minutes and then get abandoned without being assigned to an agent. You can find portion of the trace file for the call with the session id 1...
Has anyone been able to figure out how to search the CMC information from within the call on the Phone?We'd like to be able to lookup the client matter code by name, rather than by number. Seems like a waste to have this information in the Cisco Cal...
Can anyone advise why my VT Advantage camera cannot linked to my IPPhone or IPCommunicator despite having the correct following configurations:-1) CM4.12) CU VT Advantage 2.1(1)3) Video Capability-Enabled 4) Reinistall CUVA drivers & admin sw5) Relea...
Hi There, we have recently moved buildings and before our move we were running video conferencing across two pri links. We had multilink configured and were allowing a max of 10 links to come up. Everything worked well and the quality was go...
Hi,We've been trying to get this running in hopes of convincing management that we would benefit from a video solution. I recall this product was quite a performer for basic Multi-conferencing so we purchased it off-market. Now the problem is finding...
Quick question regarding tx-queue. The admin before be placed the following command on every single switch port on the core. Does this mean that everything on 2/9 is in the tx-queue 3 and with a high priority or am I missing something here. If thi...
I have been assigned the task of setting up videoconferencing between our Polycom ViewStation MP and our desktop Unified video advantage. I have built out the H.323 device our Call Manager 5.1, and I have the video conference unit in the same subnet...
I have been looking high and low for somewhere that can provide a date-time rss feed that I can then put into the display for the dmp's. This is something that one of my prospective customers wants to see.1) Does anyone know of where there might be ...
Hello,Currently I have a new setup of Meeting Place Express 2.x and Call Manager 6.x. All calls are working properly, and audio is fine.The problem comes with the Video calls, my meeting place h323 gateway is in device pool A, and all the phones that...
We have a VIC-4FXS card in a 2801 with a analog phone hooked up to port 0 currently. We are going to hook up a fax machine that ties into CCM 6.01 BE. Whenever we pick up the phone it gets no dialtone and when I dial out it doesn't do anything. If I ...
