TelePresence and Video Infrastructure

Sx80 Port Block identity

I installed sx80 and trying to call outside , I am not receiving any audio video from remote side but they remote side can see my video and hearing audio , my side side no firewall and sx80 connected directly to the router lab interface, there is no...

Cisco Meeting rooms management through TMS with out CUCM

Can we manage Cisco Meeting rooms with Cisco endpoints through TMS with out CUCM configuration on TMS !

TMS integration with Endpoint:No HTTP Response

We have TMS 15.8 and added cisco VC endpoint(CE) In TMS for scheduling. But we are getting error no http response after some time. Could you please help1 No HTTP response on TMS for VC endpoint2 We have selected on endpoint provisioning mode CUCM but...

Expressway Clustering with Single NIC for B2B and Webrtc Calls

Dear Team,We have expressway E with single NIC deployement for B2B calls and webrtc callsexpressway E1 at DC LAN1 ( 192.X.X.X -DMZ IP) Nated with public IPexpressway E2 at DR LAN 1( 192.168.X>X-DMZ IP) Nated with public IPI have one question:Does exp...

4210 Tandberg mcu

Hi, We have 4210 Tandberg mcu with 20 ports capacity , how we can upgrade it to 40 points?Regards,

Webex Room Kit Plus / Screen Auto Wake Up

We have a Webex Room Kit Plus, we use 4 screen displays, those screens should wake up when the Room Kit is turned on but it seems to be impossible with the four screens (It works with two screens). It's there a third party accesory or Cisco which we ...

Webex Room Kit Pro - Standalone Video / Audio Switcher

We're currently building out a 150 seat theater style auditorium / lecture style room. It will be located in a new corporate training center (non-education). We're also in the middle of switching over from S4B to Cisco/Webex so I'm fairly new to capa...

CTI-5310-MCU compatible end-points

Hi, I have CTI-5310-MCU and SX20 end-points working togetherI want to buy new end-pointWhat can be the options orderable?SX10? or what?Please help

Resolved! MX 800

Hello everybodyWe're going to purchase MX800 , I see that there're only 8 microphonesWe have 20 seats , each seat has it's microphone already , Do we have to stick with Cisco Mircophone 60 which comes with the package ? - How to extend more 12 microp...

CMS LDAP integration with multiples OU

Hello evereone. Our organization use multilevel structure in AD. We have many Divisions. Around 30.My request LDAP Source Method from CMS to LDAP looks like: OU=Internal,OU=Users,OU=City,OU=Division_1,OU=GroupOfCompanies,DC=CompanyName (Work fine)If ...

TMS IBM Domino Outbound Integration

Is it possible to send an email to IBM Notes Clients when scheduling a meeting from TMS without TMSXN from the SMTP Configuration in TMS and SMTP Configuration from the IBM Domino Side & is there any configuration guides describing how to do that (if...

Not able to find CAB-HDMI-MUL4K-9M in Cisco CCW

Hi Guys,I was trying to order CAB-HDMI-MUL4K-9M cable for KIT plus series endpoint but could not find it Cisco CCW. I could not find any product in such name. Any idea, why its is not available in CCW?? Anyone could help...

NO CAM FOUND WARNING -

OK CISCO ... 1. Installed CISCO WEBEX Room 70 G2. 2. Upgraded firmware a couple weeks ago to Ce9.8.03. The system just started display a warning that the camera software is not compatible with codec ???? What is the fix please as this had been work...

C20 repetitive autocall

Hi,We have a C20 Cisco Tandberg which has a recent strange behavior. Basically, it calls himself every ten seconds when on without visio. During a visio, the C20 disconnects every five minutes.Do you have any ideas of what is happening ?Thanks. Fabri...

Use Sparkboard as room display only

Hello, We have a few Sparkboards that we only was to use as room displays. Do we have a way to default the board to HDMI in only to displayed.

TelePresence and Video Infrastructure

Forum Posts

Sx80 Port Block identity

Cisco Meeting rooms management through TMS with out CUCM

TMS integration with Endpoint:No HTTP Response

Expressway Clustering with Single NIC for B2B and Webrtc Calls

4210 Tandberg mcu

Webex Room Kit Plus / Screen Auto Wake Up

Webex Room Kit Pro - Standalone Video / Audio Switcher

CTI-5310-MCU compatible end-points

Resolved! MX 800

CMS LDAP integration with multiples OU

TMS IBM Domino Outbound Integration

Not able to find CAB-HDMI-MUL4K-9M in Cisco CCW

NO CAM FOUND WARNING -

C20 repetitive autocall

Use Sparkboard as room display only

Meet and congratulate the February 2023 Spotlight Awardees!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Connecting On-Premises Devices with Control Hub using xAPI and WX REST

Cisco Codec Pro Question

Recording p2p calls on Codec pro

CS-Codec-Plus V01 # TCC7-25 compatibility with Polycom RealConnect

CMS 3.3 Webbridge LDAP user login issues

Expressway zone not responding- inbound TLS negotiation Error

UNLICENSED STATUS ON CMS WITH CMM

Cisco Webex MS Teams video calling (VIMT)

Quad Camera Power Supply part number?

Audio distortion from a cisco webex codec pro