Hello,i have a problem with camera of other users. In the meeting i have a black stains on image of my friend. How can i fix that? reinstal doesn't works. Please help me as fast as you can.
Hello,i have a problem with camera of other users. In the meeting i have a black stains on image of my friend. How can i fix that? reinstal doesn't works. Please help me as fast as you can.
If we drop the Cisco SmartNet Renewal on most of the Cisco TelePresence Endpoints, what are the major implications besides not able to download and upgrade new software version, and replace the hardware if it goes bad. The device license (registrati...
Is it possible to open a Websocket client on the Room Codec? I'm thinking about ways to integrate with the touch10 interface and being able to send String packets to a Crestron control system would just make everything so simple. Everything I've rea...
I remember i downloaded this version in January for the Webex Hybrid setup and did succesfully. I was checking in Cisco website today and cannot see this version. Am i missing anything here ce9.12.0.85237a267b4
If you build a VCS Expressway cluster with static NAT you normally would need 2 public IP addresses, one for each VCS-E.Is it also possible to use 1 public IP address instead and use a load balancer to send connection requests to each VCS-E? ...
I am running VCS X8.5.1 on a VM exsi 6.5. Getting the following entry on the CLI .. init: id "c2" respawning too fast: disabled for 5 minutes Any ideas how to fix that ??? I can't login as admin or root on the CLI ??? VCS is operational though ??
Hi guys,Just ask to put on place a new video surveillance "IP based". Check on Internet and found that Cisco have a solution "http://www.cisco.com/en/US/products/ps6936/prod_white_papers_list.html".My questions are :1) Is they anyone who deployed thi...
Contract : 91986130SN: FCZ2244G02FThis is a new system installed about one week ago. Was operational for a few days on Ce9.8.0 firmware. System has been downgraded to Ce9.7.1 at this time. Problem is no power to Monitor 1, Monitor 2, and Camera. Tr...
Hello all,Does anybody know of any school or training center that offers training on video conferencing ? I am interested in learning how to design and implement video conferencing solutions.thanks very much in advance !!!Danny
Hello. I've been doing some digging on getting a Polycom HDX8000 managed by our Cisco TMS to be able to book in conferences. We seem to have gotten the endpoint registered to our expressway but when we try to book or put it in a conference, it doesn'...
Hi, It seems like it sending out a audio sound to detect something. It does it mostly when starting up the system, but have been getting reports that it will do it intermittently. Any ideas? Thanks!Scott
When trying to connect to SX20 using Proximity of iPad and iPhone via Wifi, after[Finding Video Systems] → [Connection to TP's IPaddress] → [Presenting to client disabled] →[Finding Video Systems] → [Connection to TP's IPaddress] repeatThe same was t...
We have on prem Collaboration solution which consists of Expressway cluster, CUCM Cluster & CMS.We have approx 100 - Room kits, Room kit mini & DX80 devices. Some are registered natively on CUCM and some as an MRA.Last week, some of the MRA mode Room...
The customer has a SX80 with presenter track and a Creston controller, we wants to change the setting “PresenterTrack -> Connector -> 1 to 5” via CLI He need this command to enter it in the Creston controller and change the camera doing the presenter...
I am currently using in room controls with Crestron and want to know when the default Call button on the Touch 10 is pressed so I can use the event to trigger some actions. Is it possible to register for feedback on the default Call button or any oth...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-07-2024 01:38 AM | ||
06-27-2024 06:47 AM | ||
06-10-2024 11:20 AM | ||
06-10-2024 11:14 AM | ||
06-10-2024 09:51 AM |