TelePresence and Video Infrastructure

I know the Physical dimensions (H x W x D) and weights of the equipment can be seen in the DataSheet.For Transportation, Storage or Customs Declaration, We need to know the Packaging Information，This is very important! Strongly Recommended:The Produc...

Hello Cisco Community,I have the question about remote connecting (pair/unpair) Touch 10 to SX80/SX20.I have two Cisco codecs in lab - SX80 and SX20 and two Touch 10.Is it real to dynamically change the pairing for one of the Touch'es between codecs ...

Hi All We have an issue with outgoing Video calls We have an internal VCS server and and Expressway in the DMZ used for external calls. Basically when I set the DX80 VC unit to go direct to the internet and not be registered and controlled by the VCS...

Running Polycom Real Presence version 3.6.0 Tried dialing into a CMS cospace that has a passcode attached. Problem is I can dial a DX80 and the DTMF signal works and I get into the room. The Polycom doesn't seem to pass the DTMF ??? Both the Polycom ...

Hi,One of our customers have newly installed Cisco Room Kit PRO codec with three Cisco Ceiling Microphones in their training room. During video calls, remote participants complain that they are not able to hear properly the speakers near to 2 of the ...

what are the main differences between Webex Roomkit Plus and Webex Roomkit Pro . what makes Roomkit Pro suitable for Auditoriums .

Hello All, We are having an issue with our precision 60 camera, for now we have it standalone and are getting the following error message. Warning: camera problem - video is stoppedTimestamp:15Z:CAMERA_MALFUNC_MOTORTimestamp:15Z:CAMERA_MALFUNC_MOTOR_...

I just want to add layouts in SX20 manually...Is this possible???

We have a CMS in TMS and use TMSXE for sheduling meetings. CMS has :CallLegs Max Active:11Where did this calculation come from ? Error try to save conference in TMS:There are not enough resources available to host this conference at the requested tim...

We have a MX800 single screen with 2 cameras. At the moment both P60 cams are connected in the Peripherals but not the Speaaker track 60. Also the icon for the speaker track in the Call Control is missing. I compared all settings with another system,...