Network [1] IPv4 Assignment: StaticIP Address, GW & Subnet Mask AssignedDX80 IPv4 Address is what it takes from Wi-Fi DHCPI have tried this at a customer site multiple times even used a mobile hot spot, tried firmware downgrade, CLI Commands for IP ...
Forum Posts
Haven't herd from anyone on my last discussion about ce9.8.x. Just thought I would start another one to see. Keep getting following issues when upgrading to ce9.8.1- No camera detected (I wait over 30 minutes to see if it's upgrading the camera sof...
Resolved! Cisco IX5000 AUX Display not working
Problem Details:CISCO IX5K – Panasonic AUX Display not working Our Investigation:We have installed Cisco IX5K with 3 nos of main display and Two aux displaySame configured in the First time setup – Described display count on configuration .One of AUX...
I connected the Lumens camera to camera control port CTS-SX20N-K9 through split cable. In documentation said that SX20 control it's camera by VISCA protocol. And it's true but there is one trouble - recalling saved presets.I can move the camera in pa...
Hi, Please help me, how to recovery the cts codec pri g2 admin password.I tried this: SSH into the codec from your laptop.Step 2 Login with the following:• Username: pwrecovery• Password: pwresetThe following message appears in the SSH client window:...
Can anyone suggest if remote commands can be routed to the Sony cameras as below: The Sony Camera is connected via the Cisco codec, the codec has a limited amount of camera commands it can send. Are you able to advise how to send those commands via...
Product:Cisco TelePresence SX80Temperature:66°C / 150.8°FPlease help is it Normal Temperature when i reboot codec they going to 60+C after i well start video calling and share docs they going to 67°C i well start continue calls last 48 hours they sti...
Running TMS 15.9.0 and have DX desktop EP's connected. In the Past I have successfully pushed config changes using TMS.Problem is I have a DX with Ce9.1.3 and I am trying to upgrade to Ce9.8.1 using TMS and it keeps failing.The file is s52040ce9_8_1-...
Hi Experts, Can you please confirm if most of the cisco TP devices such as the EX/MX/SX/Webex series only support SNMPv2? Kind regards,John
Call disconnection issue in Expressway E; When we are making a B2B incoming calls, the call arrives on the CMS bridge and disconnects after a differential time of span 15 or 30 minutes.We have analyzed logs and found that :when Our end expressway E ...
Hello,I'm trying to control lighting in a room by using the macro feature and commands. In order to do this, I need to be able to run telnet commands. Is it possible to run telnet commands directly from api macro calls? If so, how would I do this? ...
Is there a an option to restrict user access from the touch 10 panel for VTC systems registered to the VCS vice the CUCM ???I have users that want to restrict access to VTC conference room system so only authorized user has the ability to make a call...
Hello,Is it possible to connect a second amera on a Cisco Webex Room 55? RegardsRoger
Good day, I have been requested for the cheapest east to set up on the fly solution for video conferencing solution.1. could someone give pointers on a cheap solution am looking at the Sx10 and SX202. What TV would you recomend that is compatible i w...
Good dayAs there are many manufacturers of mobile phones, I am sure that connecting anyone of them is going to have problems. I have been running integration tests with Samsung S10, S8, and Apple iPhone 8 and an iPad Pro.In all cases the application...
