TelePresence and Video Infrastructure

Does anyone have an example of a regular expression for the following pattern to be dialed from an internal video endpoint on the VCSc that will route to the internet.My customer has a busines partner that wants them to connect to their bridge dialin...

Trying to get Jabber to authenticate against multiple controls.Multiple controls, 1 express.When Jabber attempts to register via express, it uses a search rule to determine where.If the request gets passed to the Control 1, and the AD account does no...

Hi Experts,I have a case to discuss; one of my client is already having WebEx and they are using this for Web Confrencing. Now we have implemented TelePresence (MCU, EX90, Codecs etc) and they wanted their WebEx users to join to the video confrencing...

HiI'm starting to install a virtual TCS, follow the installation guide with all the steps, but when you first enter you see WEB page directs me to http:// <ipaddress> / tcs / # page: overviewEdit.anyone knows that may be happening or if I need someth...

Since this morning we are getting the following error when trying to book any of our ~100 systems:"There are not enough resources on any MCU to host your meeting. Please go back and remove some of the participants, or lower the conference bandwidth.T...

Hello,We just purchased a CISCO Telepresence and it disconnects after 30 mintues but only when accessing a certain command. The command typically will call in the VTC is fine for 30 mintues and then disconnects automatically. The command has to call ...

Hi All,During NMAP tests we discovered on MX200 (TC6.1.1) an unidentified port 857 UDP. Endpoint was in standby mode during the tests. Did somebody know what does it stands for?It's current list of opened ports with their description available somewh...

I don't see anything in the documentation (I may have missed it, which is why I'm asking to be sure), but are there any specific guidelines regarding maximum latency or jitter between the TMS front end server and it's SQL back end?  I've a client tha...

HiI couldn't solve my doubt with the forums posts and general documentation, so i'll try to get some help from all of you here.I have 3 or more SX20 telepresences that will work as stand-alone inside the same site. At the maximum we’re thinking in re...

Hello, Is it possible to set frequency synchronization between TMS (TMSPE 1.1) and AD server? If yes, where can I found it?I remember, it was possible some time ago. Now, I don't see this option.Thanks

Hi,I have some problem with a MCU 5300, if codecs (SX20) dial up to some conference video is bad, sometimes is frozen or gets pixeled but if i place a call between SX20s without MCU, video calls are good, how can i solve this problem?Thanks for your ...