Hi,I have a SIP trunk between VCSc and CUCM. If I use a prefix, I can dial out from a C-series endpoint to a DID on the PSTN via the CSS set up on the CUCM. Is there a CPL I can use so that users using the codecs have to dial a special access code be...
Hi Together,we installed the new TMS PE with 14.1.1 Jabber ect.. with VCS X.7.2.1So the Phonebooks from the Jabbers AD( Provisioning Source) works fine . But if i push the push the Phonebooks to a registerded Endpoint EX90 on the TMS and VCS-C, do no...
We have Jabber Video for TelePresence version 4.5 installed, and it's working great overall. However, when someone using the software calls another person, either using the software or in a TelePresence room, the pop-up showing the calling party wil...
I have recently upgraded our CUCM cluster to v9.1 and would like to integrate fully with our VCS (control and expressway) for SIP URI calls.I have followed Cisco documentation and configured the followingSIP trunk from the CUCM to VCSCNeighbour zone ...
Hi!We have an installation withVCS 7.2, TMS 13.2.2. and a bunch of jabber video users. TMSPE is using for provisioning and etc, TMS and VCS are configured to import users from AD:VCS in in AD domain, AD srvices is configured, Default Zone is configur...
Hi,I´m trying to upgrade tms from version 12.6 to version 13.2.2. The tms haven´t tms agent option key and neither vcs have the provisioning option key.When upgrading, the next error appers :"The installer has detected that provisioning is enable on ...
Hi AllI have been trying hard to figure out how to get this working, I have TelePresence Conductor XC2.0 , VCSc 7.2.1 , TMS 14.1.1 and also MCU. There is a requirement to call using numerical alias and also URI alias for example.Meet.cisco.HD@cisco ....
Hello Everyone, I am confused if an outside user with a jabber.com account can log into the corporate video conference using "cisco jabber video for telepresence". In other words - outside user with "xyz@jabber.com" account logs...
We are trying to create log files on our CTS-1000. Here is what we did:From Cisco Telepresence System AdministrationSelect Log filesSelect Capture new log fileSelect Problem Type - PhoneSelect Catpure New Log Files buttonThe system displays the foll...
Seeing inconsistent behaviour in TCS when dailing the on-demand number versus accessing the GUI and starting a recording. The TCS has the Premium resolution option key and is running TCS5.3resolution different when using the static on demand recordin...
Hello. I need some best practice on this case.We have a soft copy of Telepresense TMS and TCS server appliance.Is this a good idea to install a TMS on the TCS server?So, TCS and TMS applications will be available on the same IP-address
Hello Experts,We have a C40 endpoint registered with VCS. The version of the codec is 5.1.The Precision 12X camera is located 16mtr distance from codec. The COM cable is connected with 3 repeaters and we are able to control camera with the remote. Th...
Dear All, Please, advise me how to solve the following issue that I am Facing with 6000MXP Profile Unit, and Also C60 Unit with ASA 7.0.The problem as following:1- H.323 Protocol inspected.2- H.323 Port and Data Ports as following:For 6000MXP:H323 No...
