Hi, ExpertAs the subject, not sure what's the default setup, but the movi calls to each other in LAN can achieve only 352*288, with configured bitirate 314kb/s in the statistics during the callsee below picture for detail:
Hi, ExpertAs the subject, not sure what's the default setup, but the movi calls to each other in LAN can achieve only 352*288, with configured bitirate 314kb/s in the statistics during the callsee below picture for detail:
Hi,A colleague of mine has an issue with high CPU load caused by the java process under the wrapper, he's using the latest version of TMS 13.2.2 with TMSPE, the server is running Server 2008 R2 Enterprise, 4GB RAM, 64bit, the latest java update (9) h...
Hi Friends,I recently performed a great upgrade of a whole Cisco telepresence environment, including a lot of telerepsence components, such VCS, TP Server, TMS, CUCM, CTS 1300, CTMS, CUVC, C Series endpoint, jabber, 9900 and 8900 series video phones....
We have installed Cisco Sx20 Telepresence and using Cisco Jabber Client 4.5 (Windows)On the Jabber Client (Windows) we get video and audio from SX20, but SX20 is not getting video and audio from the Cisco Jabber Client.Could someone help ?When I esta...
Team,We are implementing an 8321 ISDN gateway and Telepresence Server MCU (MSE8000 Chassis) in a customer environment. In the past we have used a 4500 MCU and all incoming ISDN calls were forwarded to the MCU IVR where you are prompted to enter the c...
Hello,I am looking to see if any environment out there currently has this as a need.When booking a conference, we want to have the ability to define what the alias will be on the MCU, instead of TMS automatically assigning the conference alias out of...
Hi, ExpertsThe VCS Expressway in my network is running TURN, and normally, when two Jabber Video Mac call each other, in some situation, they could estalish the connection with each other directly, although all of them are behind NAT, and we called "...
hello ,with a member VCS from a cluster the communication with TMS Agent to Provision MOVI is disturbed. The Trial to keep this over TMS running failed all the times 12/5/2012 9:44:39 PM Event Created 12/5/2012 9:44:41 PM Event exec...
Hello, We have search rules in the VCS that send of domestic phone numbers to the Avaya PBX so video endpoints can make phone calls to telephones.I am having a hard time understanding the regex string for international Currently our domestic string i...
We have reports about an sx20 constantly ringing during the night, supposedly its calling itself. The call history on the touchpanel showed three missed calls from 101@xx.xx.xx.xx where xx.xx.xx.xx is the ip adress of the SX20 itself. The last o...
Hi Team,We are unable to load Option key for MOVI in our VCS server.We get the error message "Failed to Add Option Key Option Key Invalid".The Part Code which we had orderd is LIC-MOVI-25.regds,aman
Hello folks,This is my first time posting here and I hope someone can help me.In TMS (13.2), is it possible to just "turn off" the ability for a conference to end automatically?I have several CTS endpoints that are connected to CUCM, and a two 8710 T...
Team,Can someone clarify an issue for me.I have a VCSe, with the Dual NIC option.The External interface is defined as LAN 2LAN 1 is a 172.x.x.x network and LAN 2 is a 192.x.x.xThe VCS lets you specify an IPv4 Gateway but it is for the LAN 1 network. ...
GreetingsHas anybody seen this error on a EX60 before, the endpoint was switched off for few days when user switched on to make call it lost http response in TMS, after several re-boot I can get to the web-interface via https:// but get this error – ...
Hello, Since some software update it seems top me that users cannot control the layout on C-series endpoints with the touch panel anymore. At least when you have a dual display setup. Its very strange because this is a feature that i think you would ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-01-2024 03:26 AM | ||
08-20-2024 07:09 AM | ||
08-20-2024 03:11 AM | ||
08-13-2024 12:04 PM | ||
07-29-2024 10:10 AM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 | |
1 |