Just setup and finished testing our new MX300 VC unit. Powered it down after a day of use and now it continuously reboots. Anyone experience this behavior and have any suggestions on how to overcome it ?Sent from Cisco Technical Support iPad App
Can you explain me how to configure VLANs on I/O GbE card on DCM 9900 (v10.00.10), please?I've configured "fixed individual ports" but on Configuration > I/O > VLAN there are settings only for port pairs, not for individual ports.
We are using TMS with TMSXE. The users can reserve conference rooms from their Outlook.When they reserve only one room the MCU is not reserved from TMS.So when they want to have an MCU to add remote rooms/EP's they TMS manager needs to manually add t...
Hi,Is it possible to complete the hardware setup (cameras, microphones etc.) of a CTS1300 system without having it registered to a CUCM cluster?I am scheduled to install one for a customer but their network provisioning date has slipped. Would it sti...
I have several tasks which I need help with. First, I have two E20's which I need to lock down so that the users can only access the Home/Directory/History tabs. I don't want the user to have access to any of the Menu items. I have set the passwor...
Hi Experts,Im trying to Install the TMSXE Service, but the Problem is that the TMSXE can t connect to the Exchange server.Connection to the Exchange is possilble over https//XXXXX/owa and https//XXXXX/ews from the Server where TMSXEis installed.So wh...
Hi outthere,I'm using an EX60 for testing. Everything works fine, but my colleges told me that the endpoint is using two different MAC addresses. These addresses are seen on the awaya switch the ex60 ist connected.After doing a factory default the si...
Hello,My TMS version is 13.2, new installation.I tried to enable TMS agent under Administrative tools->configuration->General->enable tms agent. After all, I don't see any process under activity status.If I connect to VCS, under Systems > Navigator, ...
Hi all,does anyone had bad experience when using a Firewall Traversal solution with Juniper SSG 520, Firmware 6.1.0r1.0 ?The Juniper has all VoIP/H323/SIP ALG disabled, but when some H323/H460 traffic pass this FW, it cuts the TCP signaling after a f...
hiOur Cisco Telepresence server (8710) connected to VCS working with CTS-3010 endpoints (with presentation codec) registered with CUCM for presentation sharing during multipoint meeting.We found that when sharing presentation from a CTS-3010 to othe...
Hi GuysWould anyone have any knowledge of integrating the CTMS with Conductor?- Is this a current release or roadmap feature for Conductor?- What version of CTMS firmware would be required?- Are there CTMS server hardware requirements specific to ...
Hello I have a strange behaviour on a Profile 2000MXP.The buttons Selfview and Layout have no effect on the display, (the remote control works on a other system)And when I make a call to an other system, the system connects but I keep seeing my own c...
I have a Precision HD 12x camera connected to a C40 that is not working properly. The codec and camera have been in use for some time but recently the room where the unit is located was renovated. After the renovation the camera is now powered by an ...
hello i need your helpwhat license need to register two video endpoint SX20 on Cisco Unified Comunnications Manages Business Edition 8.6? i can register telepresence endpoint on CUCM BE 6000 8.6 ???thanks for you HELPJCA.
