Hi
We have Cisco meeting server 2.2.10, tried to install cisco meeting app on IPAD with IOS 9.6 but found that apple store installation require minimum IOS 11 version.
Is there another version that supports IOS 9 and what would be the way to ins...
0down votefavorite
I cannot seem to get this to work using Powershell 5.1. The device is a Cisco MX800 CE9.3.
$url = "https://10.1.135.20/getxml?location=/Status"
[Net.ServicePointManager]::ServerCertificateValidationCallback={$true}
$webclie...
I am having no problem updating things like community name using
http://endpointip/putxml
and this in the body
<Configuration><NetworkServices><SNMP><CommunityName>ABCD</CommunityName></SNMP></NetworkServices></Configuration>
However this is not wo...
Hello all,
A customer encounters some camera issue with MX200 G2. Camera doesn't place in default position, can't stabilize correctly, and moves continuously .
Some reset position of camera and reset factory don't solve that.
I found no document wh...
Hey all,
Quick question. We are upgrading our TX9000 to the IX5000. I hate the idea that the TX will just be scrapped so wanted to check if anyone knew if the screens or codecs could be re-used elsewhere.
We are involved with a local school where...
I have deployed sx 80 for the client to join bluejeans meetings.Now in a call it seems that the content shared from the far end is not displaying in the sx 80 after 30 mins into the call.
Please assist.
HiI am running a MX200 G1 with a CTS-CTRL-DVP8 Touchpanel connected.
the Touchpanel has since turned unresponsive, and it gets stuck on the Cisco logo when loading up. Numerous reboots etc and still stuck on the Cisco Logo page.Tried the Touchpanel...
Hello, I have a c40 that continues to baffle me.
I call into my MCU 4510 via SIP at 768kps, and it connects with a 1280x720 resolution.
However, it eventually reverts to XGA ... usually after several minutes.
This particular c40 used to be conn...
Hi All,
I have a SX20 with version CE8 witch is not allowing me to see the the Web Interface.
When I access to the codec with the remote control, I don't find the option NetworkServices to enable HTTP On.
Can you please let me know how to do it, I al...
All,
I am having issue with webex setting configuration in TMS, I have entered hostname as configured on Webex Admin page under Site setting. I am getting error message Connection Failure and could not connect to site. Verify that the hostname and si...
Hello everybody! I ask your help :) I have several SX20 and a working Asterisk server, tell me, please, how can I register the SX20 it to Asterisk server? because alas there is no possibility to switch to CUCM ...
Hi,
I have an issue on MX800 speaker tracking.
Before my MX800 Speaker track is registered on VCS-C and it is worked fine.
Since I migrate on CUCM the speaker track is not worked anymore, one Camera was not detected anymore, and the display on TMS ...
Hi all
We have several SX10 endpoints registered to CUCM. External calling is through Expressway (C and E).
I'm able to make SIP calls like room@domain and also H323 calls with IP. But I have been looking for solution to call Polycom RMX 2000 syste...
Hi,
We have a CMS 2.2.10 with recorder enabled but the user asked us if its possible to change the resolution of the recording (lower) to generate a smaller mp4 file. I have read documentation but never found information about changing this, I thi...
Is there a setting that will allow me to have self view be full screen every single time? Currently I maximized it from the touch panel as the local view while the remote view is on the opposite monitor. As soon as the view changes or content is show...
