Unified Communications Infrastructure

I have a Unity 4.0(4) installation with a failover server and a singe Exchange server. If I go into the status monitor on the primary server and look at the port status. I frequently see the status message 'check for cross-box logon'. Since the on...

Refering to the port to user table in the 3.1 ordering guidlines :http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_quick_reference_guide09186a0080093b5b.htmlIs there an equivalent one for Unity 4.x i.e number of recommended users for ...

Unity 404 off-box exchange e2K. The exchange server(partner) will be upgraded to exchange 2003. 1.what's the steps to take on the unity side? 2.If there are couple e2k have to upgrade and they will coexist for a period. Anything special has to consid...

unity313 offbox exchange55 on NT4 will migrate to w2003 and exchange2003. Unity will be installed on a new server. We are planning to do this way:1.install new unity with 313 into new w2003 domain(unplug the dongle from the old server and attach to t...

Have Unity 4.0(3) talking with virtual exchange server. When the active exchange server goes offline and comes back, Unity will not resynch automatically. The VM are stored on the Unity server until manually stop and start Unity service. Has anyon...

I have a Cisco 2620 gateway with a VWIC-1MFT-T1 configured as a 12 channel cas. It is running IOS Enterprise Basic version 12.2(15)T14. When I try to set up the onramp application I get the following error:------------------------------------------...

hello!scenario is the following:ccm 4.0.1 sr2 AD integrated, Unity 4.0.4 sr1the new users can access their voicemail by clicking the voicemailbutton on the phone. if a caller tries to reach one of the affected persons- he also comes to the mailbox if...

Hi,I am trying to work out this call flow using unity AA and a single call routing rule(forwarded calls).Caller->Phone->busy->Unity_AA->PromptPrompt->Press 1 -- Dial another Extension Press 2 -- Leave voice mail Press 0 -- operatorI am ...

UM 4.04 sr1We use one account to run Unity and a separate one to install.The account to run Unity has the following ACL:SPECIAL ACCESS for organizationalUnitCreate ChildWe do not allow accounts or DL to be created from the Unity SA side.Is the above ...

I have no problem logging on to PCA but as soon as I click on Cisco Unity Assitant it pops up a box titles MediaMaster which states "Unable to connect to the vocie server". And the ability to listen to and record greetings is disabled. If I do the sa...

I am trying to move a existing Unity 4.0.4 VM only system to new hardware using DiRT. I am getting errors when I run the DiRT restore on the new Server. The first error I get is: Error in cmbRestore routine Permission denied.Then I get a monit...

Customer currently has w2k/e2k and wants unity installed. We are planning on installing unity 4.03 in March but have just found out that the customer is planning on upgrading their exchange environment to exchange 2003 at or around the same time. M...