Unified Communications Infrastructure

Hey folks!Anyone had any scary shtuff appen installing 4.0.4 on W3k server? Same Q with running it on W3k as a UM system in a fully W3k & Ex3k environment.I'm mostly anxious about the schema updates & any issues with AD really. Any feedback'd be gr...

Hello,System is CCM4.0(1)ES30 and Unity 4.0(3).I have a little Problem with Call Transfer in Unity. The situation: When a subscriber is out of office, he/she changes to the alternative greeting telling the caller that He/she is out and that the call ...

When trying to run the message store configuration wizard I am getting the following error. Failure encountered while synchronizing the SQL database with the mail store. hr=0x80070433.The partner Exchange server is running Exchange 5.5.Unity has jus...

We have cisco CCM cluster using a Unity VM, Also we have lucent PBX which is connected to CCM via 3745 PRI trunk and it uses Audix VM.Now users on Lucent PBX audix VM system wants to forward the VM to Unity, if they tell Audix to dial IP Phone extess...

hello - When using the platform configuration disc, the program sets the C: drive at 4G, and I don't see how it could be changed. Does anyone know the reasoning behind this, and are their plans to change it? Every so often I have an issue with this,...

Hey,I've just installed unity 4.0.4 with integration CM4.0 and Exchange 2000.The installation took a whole long day.I have 2 licences for phone languages and the customer want to replace the english language with the french.Can I do that without a re...

Trying to find out how the values are calculated on some of the Unity perfmon objects. Example (Voice)(AvCsMgr)\Delay - Subscriber Logon and (Voice)(AvCsMgr)\Delay - Subscriber Message Access. If I sample every 15 seconds... there may have been 1 o...

How does one get the MWI (envelope) to stop on the secondary line, and only have it light on the phone with the primary line? I have the Service Parameter set to light on first line only. The line is set to use the system policy. Yet, the envelope ...

Hi all,Is it possible to configure message notification using SMTP (Pager Text) with a UNITY Voicemail licence?It works fine with a unified installation, but not with VM.Thanks,Regards,Mike

Hi All,Does Veritas Backup Exec 8.6 or later qualified for backing up Unity failover 4.X? Any documents refer to this issue?-----------------------------------------------Refer to the White Paper: Backing up and Restoring a Cisco Unity System"The pro...

An orphaned subscriber account was created during a DiRT restore. The user was no longer with company so mailbox didn't exist when DiRT restore was performed. The name had been changed to a new user so now there are two entries with the first and las...

Hi all,Customer has run Permissions Wizard and says the OU for everything is "UnityUsers", runs Permission Wizard successfully then goes to add a new subscriber through Unity. Unfortunately, the user gets created in the "Users" folder instead of the...

I have a customer that has Unity 2.46VM.We are going to install a new 4.04 Unity server (exchange2000 on box)Can I use the Migrate subscriber data tool to move the old Voice messages to the new Server and if so should I use the tool that is listed un...

I am in the process of purchasing an additional Unity server for my company and have a few questions. First, the configuration I am looking at using as detailed in the URL: http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_data_sheet091...