So besides at the line level and router pattern is there anywhere else CUCM controls the caller ID number being sent? When I run a debug on the gateway I see the DN being sent as the calling party but the number shows up externally as the billing nu...
Forum Posts
License should borrow up right? Admittedly I'm a bit of a noob on smart licensing things, so I'm probably missing something. I purchased this lab license back around May, set up my server and then took a hiatus. Back at it now, was getting softphones...
Hello all I'm doing an Unity minor upgrade, from 11.5.1.15900-18 SU5 to 11.5.1.23900-30 SU11 We installed the SHA512 cop files, then the SU11 install looks stucked 10/08/2022 12:10:23 format_partition|Writing 0 to /tmp/tmp_file_7002|<LVL::Debug>10/08...
Hi All, I tried to proceed with the option "utils system upgrade initate > dvd local" in cli after inserting 11.5 OS into CUCM VM to upgrade the cucm 8.6 version to cucm 11.5, but it is not being uploaded as shown in the photo. I thought it was a pro...
Has anyone experienced this? 2 ISR 4321 Gateways running 16.03. PRI in each. Connected over the network by GigE but sitting in the same rack. When a PSTN call comes in 1 gateway over the PRI and goes out the other gateway over PRI to the PSTN the...
VG 224hi every one can I connect VG 224 to NEC sv9500 with Sip directly?
Resolved! Cisco CUCM & IM and presence
We have done vulnerability scan and found few vulnerability for Cisco IM & Presence & Cisco unified communication manager.Vulnerability 1 : Port 80 is open for Cisco IM & Presence.Ask : Do we need to have port 80 open or can we disable that port ?Vul...
Wanted to get some thoughts and opinions on Speechview before making a decision to implement.- How's the quality of the transcription?- Does it impact unified messaging or does it still work the same as without Speechview?- Do most users choose to "H...
with multiple MRA clusters scattered in different regions with their respective cucm cluster, is it possible to just enable SSO on one single region cluster of cucm, unity and Expressways and leave other region clusters on non-SSO, the reason i ask i...
Resolved! CER No Valid Upgrade Options Were Found
Hello, my CER is on system version: 11.5.4.20000-3, I need to upgrade so downloaded UCSInstall_CER_12.5.1.25900-14.sha512.iso From the release notes it looks like I can do a direct upgrade with no cop file but when attempting to load it says "no val...
I am planning to install a new Cisco Expressway-C and restore the backup from old server. Since the license is tied to serial number. How to get / generate a new license for the new Expressway-C in Cisco Software Portal? Or do I need to contact Cisco...
Hello everyone, I'm having trouble with CUCM and H323 gateway operation. It's not a new setup and it worked before but now I'm seeing that H323 gateway is not showing the IP address on CUCM.I know that it's normal to show Status as Unknown, but IP ad...
Does CUCM support adding a display name for a specific commercial line to display when they call into any VoIP registered on the call manager? IE if a landline dials into a Directory Number configured on a VoIP if that commercial landline could be as...
I am hoping this will find someone that has experienced issue before or has an idea where to look? I have one site having call issues with SIP based calls, with the following conditions: They will receive a call and only hear one way audio - but not ...
Dear ALL, I'm newbie in Cisco UC platform, we purchased new UC Phone 7841, i have the S/N, ip-phone's MAC address and extension, but i dont know how to add into UC and use it, anyone can help it? Support
