Hi guys
I have a couple of UCS m220 servers which used to work together in some sort of clusterThey were decommissioned and I am now trying to repuprose themI have never touched an UCS before and I just started reading about is
Can anybody tell m...
Hi All, Anyone configured a VM and a dedicated Ethernet NIC to be used as a SPAN solution? The VM is defined and looks OK I am just having problems getting the physical NIC connected to the softswitch within VMware.
Sorry if its a dumb simple answer ...
have been asked to install Windows Server 2012 R2 on a B200 M3 blade. My storage team presented one drive of 150GB (single path) as LUN ID 1. I boot up through the KVM using the mounted Server disk, and get to the point where it cannot find any driv...
I am looking for any Cisco HPC reference design that includes the servers (GPU-capable), high-speed data center network, high performance storage (2PB in the beginning), and data center management tools. Any CVD or whitepaper will be appreciated. Tha...
Hello, Having an issue with a UCSB-B200-M4, please see attached. It will run for a few days then crash. UCSM is also calling out "Controller 1 on server 2/2 is inoperable Reason: Device non-responsive" Do you think the raid card is the root cause o...
Hello, I've been looking at an XML being pulled in from the UCS... and I really don't understand some of the acronyms. I've been searching all over online and can only find bare minimum, I wonder if anyone able to help? I'm generally looking for a li...
Hello,
We have UCS system with FI Cisco UCS 6332 16UP cluster. Both FI's mgmt addresses and VIP IP are in same subnet.
FI-A: x.x.x.12/24
FI-B: x.x.x.13/24
VIP-IP: x.x.x.14/24
We can successfully ping and ssh to all three IP addresses. We can acce...
I have 2 FI's and a UCS chassis with 4 M200 B3 blades. I only have one 3850-48U-E switch. Is there a good document on how to connect/configure the FIs to the single switch? I know this is not ideal but until I can afford another switch I want to star...
I have a M4 B200 node with a pair of E5-2689v4 CPUs. I'm are currently running the following versions.
UCS Manager: 2.2(8b)
Capability Catalog: 2.2(8b)T
BIOS: B200M4.3.1.3e.081120161737
Board Controller: 12.0
CIMC Controller: 3.1(21a)
From what I...
Hello All,
As a part of new green field build, we intend to deploy 6332-16 UP FIC and hook up 7 chasis on to it. Blades would be B200 M5 and this will be integrated with Pure storage and Nexus 9K on Network side. I could not find any exact or rela...
I've been doing some searching and not really finding anything exactly what I am looking for. I have inherited some UCS Domains lately with a mix of M3-M5 blades. There are several updating Service Profile Templates named to the clusters in VMware. ...
Hi, am looking at ordering new RAM modules for a UCS-C220-M3 server. RAM specific to that model is now EOSupport and Sale.
Which module is a suitable fit for this server?
How do you shutdown UCS central virtual appliance? I have it running on a standalone ESXi machine and I need to shutdown the ESXi machine for some maintenance. Since the vm doesn't have VMware tools installed you can't shut it down from vCenter and...
Hi,When I am trying to transfer log file of more than 32Mb from UCSM to my local server,I get time out error after 32Mb .Logs of size less than 32 Mb is successfully tranferred from UCSM to local server. For switch I am able to transfer logs of more...
Hi,
I am going to migrate our FI and MDS with the new units. i need some of your inputs please. Below is the current devices i have in out infra.
Current Devices.2 x Fibre Interconnect - Cisco UCS FI 6248UP doing HA2 x MDS SAN Switch - Cisco MDS ...
