Unified Computing System Discussions

Conectar Cisco UCS via Nexus a NFS via IP

Tenemos una solución Cisco UCS la cual esta conectada a los Switches de Agregación Nexus y cuando se trata de conectar un o unos ServidoresVirtuales o SX a un NFS via IP no establece la conexión generando time-out, pero si la solución Cisco UCS es co...

Server hardware not supported

I added in some b200 M4 blades into the UCs chassis and tried to reack the slot. but got this error. I am running ucsm 2.1(3a) any idea?

changed service profile from B200M2 to B200 M3 now vmware stuck on booting

I had a service profile that was attached to a B200 M2 server but I disassociate that profile to that server and associated it with a b200 M3 server with more memory. now its just stuck on loading up vmware at iscsi_vmk loaded successfully and thenvm...

USB Composite Device / Cisco Virtual Media driver letters in Windows

Hi, everybody.I just saw two iSCSI LUN's "disappear" from Windows Disk Management, hope you can help me get them back. UCS C-220 M3 standalone. Updated with Host Utilities ucs-c220-huu-2.0.3i.isoWindows 2008 R2 SP1 installed using ucs-cxx-scu-4.0.3.i...

RedHat Clustering with Cisco UCS B Series?

Hello,I’m trying to figure out how to configure HA with luci/ricci and Cisco UCS. I’ve added both of my nodes into a cluster in luci, but can’t seem to get fencing to work. In testing this, I found the fence_cisco_ucs command. Running this against UC...

Resolved! is there a way to remove the Rack-mounts item from the equipment tab? (we dont use them)

Hi,Is there a way to remove the Rack-mounts item from the equipment tab? (we dont use them and never will).ThanksSteph.

How to get VIC adaptor name and its running firmware from UCSM XML API

Hello,I'm trying to get VIC adaptor on the blade and its running firmware. I have preloaded VIC adaptor details in my script which are supported for the Cisco UCS blades. For eg, (1240, 1225, 1227, M81KR, etc). So, I need to match any one from this l...

Resolved! UCS PE 2.1(3a) not pulling in service profiles

Hello, I just wondered if there was a trick to getting the service profiles from a live import to show up. I get all 6 of my chassis, and all the blades. My live environment is 2.1 as well.

Nic Teaming problem UCS (blade) with Vmware

All, We have below scenario, There are two VMs in separate two ESXi hosts (blade servers). Each VM is having two nics connecting to two port groups; production (prod) and heart beat(hb). In UCS, two nics are added to each host and are in active-activ...

Resolved! Add Disks to Increase Storage on Cisco UCS BE6K

Hello Experts,We have a Cisco UCSC-C220-M3SBE and we'd like to add more disks to it to increase the storage in VMWare. Would it be just as simple as buying another compatible HDD (like this one: http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Resolved! Switch disk in servers without losing content

Hi,Need to change server hardware on a couple of servers, and wanted to just change the disks, and hopefully it would start up on the new server.But that is not the case :(I took out 2 disk (Raid1) from a UCS B200M3, and put it in a UCS B200M2, but e...

Creating an Appliance Port, port mode Access fails

Hi,I wanted to configure an ethernetport on one of our FI 6248 (Firmware 5.2(3)N2(2.22c) )for a directly attached linux server. Setting the port mode to access in the configure as Appliance Port dialog and selecting the right VLAN fails with an error...

Cisco IMC Supervisor password

I have several C240 M4 servers that I would like to manage as a group.I have installed the Cisco IMC_Supervisor, but it can't find eth0. ERROR = pcnet32 device eth0 does not see to be present, delaying initializationI need to be able to check/cha...

UCS Director Same Image multiple groups

Does anyone know of a way to allow multiple groups to share the same template (image)? When you go into virtual computing, you're able to assign it to one group, but we want all groups to use that same template.

Problems with VNIC recognition on ESX Hypervisor

HelloI have 1 Cisco UCS 5108 Chasis with 4 Cisco UCS B200M4 Blade servers, VIC 1340, adapter firmware version 4.0 (1c) and the UCS Manager firmware version 2.2 (3c)I have one service profile with 12 VNIC for each blade and I saw the following vmnic i...

Unified Computing System Discussions

Forum Posts

Conectar Cisco UCS via Nexus a NFS via IP

Server hardware not supported

changed service profile from B200M2 to B200 M3 now vmware stuck on booting

USB Composite Device / Cisco Virtual Media driver letters in Windows

RedHat Clustering with Cisco UCS B Series?

Resolved! is there a way to remove the Rack-mounts item from the equipment tab? (we dont use them)

How to get VIC adaptor name and its running firmware from UCSM XML API

Resolved! UCS PE 2.1(3a) not pulling in service profiles

Nic Teaming problem UCS (blade) with Vmware

Resolved! Add Disks to Increase Storage on Cisco UCS BE6K

Resolved! Switch disk in servers without losing content

Creating an Appliance Port, port mode Access fails

Cisco IMC Supervisor password

UCS Director Same Image multiple groups

Problems with VNIC recognition on ESX Hypervisor

Get ready! Great things are coming to Cisco Community

New name, same great product: Cisco Spaces

Congratulations to the July 2022 Spotlight Award winners!

Safeshut Workaround?

SR-IOV on B200

FN - 72479 : concerning upgrade failure for B-Series M5 Servers

nfnic driver with high LUN count

How do I match a Windows disk to a UCS LUN?

Rollback Cisco UCS server firmware

Should we use FCoe or FC on UCS

Changing Hyperflex IP address Scheme

C220 M3 embedded raid pass the drives onto the OS.

Upgrading BE6K M5 VMWARE to 7.0