Unified Computing System Discussions

Hello, I am looking for installation guide of following HBA card for UCS Server, unfortunately i couldn't find. N2XX-AEFCI05 Emulex LPe 12002 Dual Port 8 Gb Fibre Channel Part. Can any body share the installation process ? Is it hot swapable card ? R...

When FI-A and FI-B is active, we are able to access the FI cluster GUI. When FI-A, failed we are not able to access the FI-cluster GUI. It is normal or do we missing any configuration for failover.

Hi, all, i have configured Service Profile Template, but i can not assign it on blade server because of following error There are not enough resources overallMAC address assignment failed for a vNIC, possibly illegal MAC address or no available MACs ...

Here's an odd one for you! I deployed UCS Central Appliance, v 1.3(1c), and performed various bits of configuration last week. I've gone to log in today and am unable to login to the standard interface, https://ucsc-01/#. I get a spinning cog that ev...

in UCS server, we are using one blade for DMZ zone. Customer requesting to give one dedicated uplink port for DMZ-server in FI. Please advice the best practice for DMZ blade vnic and uplink configuration on FI side.

Hi, we have one connection with a switch 5548 and a 6200 UCS with two ports in port channel.These ports are 8g but not figure how 16g to NPIV and NPV, like show the picture. we will be thank for any answer.Thanks

B200-M4, UCS 2.2.6e. Host Firmware Package 2.2.6e Autoinstall server 2.2.6e Board Controller running version 10.0, startup version 5.0 Why is startup version not properly updated ? see g1 and g2 attachments

Hi, We have 3 units of C240 M4SX with CNA VIC 1225 attached to Fabric Interconnect (FI). I understand that in order for the FI to discover the UCS server it need to be connected to LOM or VIC. In my case, when I connect to FI via VIC, the server is ...

Hi Everyone, The support forums have been a great help wanted to thank everyone for their input. I'm upgrading to 2.2(6) from 2.2(3d) and during the auto install I'm getting stuck at 65% on my Fabric Interconnect. I Tried to force it with manually b...

Dear expert, I have installed UCSC-RAID-MZ-240= RAID into ucs-c-240M3 server.I have disabled  embedded RAID card from bios. During installation of wind2k12 server I can't find driver for RAID card.I have tried several driver but it is not working. I...

Sooooooo, I believe I am at least part-way to having this configured properly. I've zoned, assigned storage, configured boot from san on the UCS. I installed vmware by mounting the CD image, booting from that, installing from my SAN LUN. Did a touch...