Installed UCS Central 1.2e using ovf in VM Center. Can only register 1 domain. Of course this a network issue, or is it? Will a successful install include the ability to ping all UCS domains/subnets from the UCS Central CLI? Has anyone tested thi...
Installed UCS Central 1.2e using ovf in VM Center. Can only register 1 domain. Of course this a network issue, or is it? Will a successful install include the ability to ping all UCS domains/subnets from the UCS Central CLI? Has anyone tested thi...
Hi All, I recently tried to do a UCS Mini BOM on CCW and the it gave me a an error when i tired to configure 8 FC SFPs to the two FI6324 saying "UCSB-5108-AC2 requires a minimum of 0 and allows maximum of 6 from Fibre Channel Options" On the officia...
Do we have a documentation how to change a L2 based Nexus 1000v installation to a L3 one ?I've never done it; I assume it is disruptive ?Any feedback is welcome !Walter.
I do not see any best practice configuration guide for the Cisco UCS with iSCSI boot.I am currently running Cisco UCS 2.1 & Trying to upgrade to 2.2.I need to find if anybody is using this in Production & good experience with iSCSI boot .SincerelyVir...
Hi, After upgrading to CIMC version 2.0(3i), launching KVM Console fails with Java error "Unable to launch the application" Java Exception trace follows:JNLPException[category: Download Error : Exception: null : LaunchDesc: null at com.sun.javaws....
Just in case you haven't seen it https://communities.cisco.com/docs/DOC-57385UCS Tech Talk: What’s new in the world of UCS Central version 1.3(1)https://communities.cisco.com/docs/DOC-35264UCS Central Best Practice Guide --- Updated for Release 1.3(1...
I have a relatively new (2 months or so) C240M3, and I happened to be going through the CIMC today and noticed the storage log has the following entry from the RAID controller every 3-10min:"Unexpected sense: Encl PD 08 Path a80c0dc0ce0000bd, CDB: 1a...
My Fabric Interconnects 6248 hangs with the following single line message "N5000 BIOS v.3.5.0, Thu 02/03/2011, 05:12 PM I've tried going into the Golden Bios and showing debug message and the following was displayed before it hanged. N5000 BIOS v.3....
Tenemos una solución Cisco UCS la cual esta conectada a los Switches de Agregación Nexus y cuando se trata de conectar un o unos ServidoresVirtuales o SX a un NFS via IP no establece la conexión generando time-out, pero si la solución Cisco UCS es co...
I added in some b200 M4 blades into the UCs chassis and tried to reack the slot. but got this error. I am running ucsm 2.1(3a) any idea?
I had a service profile that was attached to a B200 M2 server but I disassociate that profile to that server and associated it with a b200 M3 server with more memory. now its just stuck on loading up vmware at iscsi_vmk loaded successfully and thenvm...
Hi, everybody.I just saw two iSCSI LUN's "disappear" from Windows Disk Management, hope you can help me get them back. UCS C-220 M3 standalone. Updated with Host Utilities ucs-c220-huu-2.0.3i.isoWindows 2008 R2 SP1 installed using ucs-cxx-scu-4.0.3.i...
Hello,I’m trying to figure out how to configure HA with luci/ricci and Cisco UCS. I’ve added both of my nodes into a cluster in luci, but can’t seem to get fencing to work. In testing this, I found the fence_cisco_ucs command. Running this against UC...
Hi,Is there a way to remove the Rack-mounts item from the equipment tab? (we dont use them and never will).ThanksSteph.
Hello,I'm trying to get VIC adaptor on the blade and its running firmware. I have preloaded VIC adaptor details in my script which are supported for the Cisco UCS blades. For eg, (1240, 1225, 1227, M81KR, etc). So, I need to match any one from this l...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-06-2024 10:53 PM | ||
10-03-2024 07:41 PM | ||
10-03-2024 07:39 PM | ||
08-15-2024 11:16 AM | ||
08-15-2024 08:03 AM |