Voice over IP

Hello,here is my problem .... I have a sip trunks line (data and voice) from the operator .... sip trunk cable is plugged into trunk port of router (Zyxel) ....I made a filter for the lines....first for data (Internet), second for  voice (VoIP) ... d...

Is there be a chance to convert special german characters like ä (ae), ö (oe), ü (ue) or ß (ss) into fax while off-ramp faxing?

I want to use our voice gateway (Cisco2821) as a mail2fax-fax2mail gateway which is working perfectly with the T.37 features.The only thing I want to change in fax header is the sender address into the sender fax number.To print the sender address in...

Hello,We are bringing up new long distance T1's in the next week from AT&T using Megacom and they are non-ISDN T1's. Does anyone have a configuration or know what setting are needed for this? We are running CUCM 4.2 (yes I know --OLD) in a MGCP envir...

Hi all,I got a customer with CUCME 7.1. Couple of phones are assigned to the same pickup group.When an incoming call is ringing, it can not be picked up (gpick-up/pick-up) with a line that has a "call-forward all" entry.I got the message on the phone...

Hello, I am unable to find the command to set the Bind Command at the Dial-peer Level... It seems to be supported in 12.4T (http://www.cisco.com/en/US/docs/ios/voice/sip/configuration/guide/sip_cg-bind_ps6441_TSD_Products_Configuration_Guide_Chapter....

i have a few sip/h323 providers. I have also enabled sip/h323 on my as5400xm(this is for my asterisk server). Since i'm using these providers, i have to put their IP in my access-list. my concern is, since my gateway is accepting sip/h323 calls. what...

Is there any command to put all the phones at once. Right now i have to put following command for the registration of single phone.voice register dn  2 number 2211 name test!voice register pool  2 id mac 0004.F225.A45E number 1 dn 2 cor incoming user...

Dear All,Anyone can give me idea how to set up time range on particular countries ? For instant i have 2 dialpeer with have the same destination country like USA and i want set time from 7:00 PM to 11:00 AM match on dial-peer100 voip and 11:01 AM to ...

I have a SIP gateway that has mulitiple customers on it that points all calls to the CSPS. I am collecting CDR for the calls from the CSPS. The question is how do I differentiate customers in the CDR?

hi,I have a spare AS5350 that i wanted to use for SIP.Do i need additional module for it to be able to support SIP?