Voice over IP

hi,i have an issue with CCME with CUECCME:IOS 124-9Tversion 4.0CUE: 2.3.2i've create a hunt group with number 2100this hunt group have three members and the final is cue pilot number)i set the pilot number of the hunt group in CFNA and CFbusy on user...

First, let me say I grew up on the IP side of this house. I'm not bad with the voice stuff, but I'm no expert. I'm hoping what I'm doing wrong is elementary and I'm just failing to see it. So, here goes nothing.I have a 3845 router with a WIC-1MFT...

Hi,Our company is moving into an office, we have a few Cisco 7961G IP phones. We wanted to use them as normal phones, one phone per person and also we have one BT line per person. The problem is that, we have realised that these phones can only be ...

My Head office PBX is connected to my Voice Router with 6 (VIC2-2E&M x 3 card) E&M Port and my Remote office is the same. Both routers are connected through fiber.My requirement is:1. HO dial to access code 60, then get a second dial tone and dial RO...

My Head office PBX is connected to my Voice Router with 12 (VIC2-2E&M x 6 card) E&M Port and my Remote office-1 & 2 are the same.My requirement:1. HO dial to access code 60, then get a second dial tone and dial RO-1 PBX number (3000-3500) 2. HO dial ...

hihave added a new region device pool etc to callmanager..have noticed on some of my new phones that some of the outbound calls show up as g.711 which is correct and other as g.729..not sure why this is as new gateway is in same device pool as new ph...

We have satellite link of: 256kbps/128kbps with satellite modem connect to Cisco 871.One of the LAN outputs of the Cisco is connected to VOIP gateway with 4 FXS phones, and the other Cisco LAN ports connect to PC's for internet.We need to configure t...

Hi,I would like to know if it possible to have one number for faxing and for voice.What I have read up is that Cisco can detect the fax tones. What I would like to do is route all inbound faxes to a viop dial-peer and all voice to another e1 port.I a...

I'm using a Cisco IP Phone 7960 Series using SIP. Moreover, I'm using a SIP proxy server OnDO and CiscoAS5350 and Voice Master. My call flow was IP Phone-->OnDO-->VM-->CiscoAS5350. My call went thru and the quality is good yet i got no ringback, i ca...

My VOIP users have a lengthy delay when retreiving their voicemail. I am not sure where the delay is. The Unity and call manager servers are here on site.

What is the different between Cisco SIP Proxy Server and Cisco CSCP-Edge Proxy? Can Cisco SPS work with presence server.

I'm having trouble with my queuing config and was hoping that someone could take a look please? I have created the following:class-map match-any critical match protocol rtpclass-map match-any priority match access-group 180policy-map queue class crit...

hi all,i'm new in pgw,i allready read the manuals,but i cant find the proper command for saving the configuration of pgw.i was using prov-rtrv:all in the mml, but this output is not that i need.i need all the details configuration.i was backing up t...

HiCan we use AS5400 NP108 or NP60 cards in AS5350 also? Are they same? Their names are different but i guess they might be same cards, are there any body who experienced this?Best Regards.deniz