Voice Systems and Accessories - Small Business

Hello,I have two offices with uc540 in both and Multisite working "8+ ID + extension" ( using a wireless conecction )At this moment, each uc540 has own PTSN lines and if I would like to make a phone call, I press 9 and phone number to make outgoing c...

Just trying to verify if the ACD function will only work without SIP B enabled - our softswitch does not support the custom extension.  The login/logout buttons do not even show up on the phone unless SIP B is enabled.  Can someone verify if it is po...

I have now managed to get my UC320W to interface with the analogue outlet in teh office for our on site exchange (turns out it was down to the fact that the cable I was using was not connected as an RJ11 should be.  Currently running on a hobbled tog...

Is it possibel to flash the Cisco SAP504g firmware onto a Linksys SPA941 Handset?Externally they appear identical, but not sure on the internals......Reason for asking is that I am attempting to deploy a UC320W solution an have several Linksys SPA941...

I have 8 SPA942 and 2 SPA504G Linksys/Cisco IP phones on a freePBX phone system and they randomly get set to Calls Forwarded and the phones randomly get locked where it asks for a password to access call log etc.  I reset the phones to default reset ...

I don't know if anything can be done about this but thought I'd ask.My client is using a UC320.  The attendant's console has a bunch of buttons on a sidecar that have been programmed as auto-speed dials.  If one of their clients calls and says "hey, ...

I am facing problem in CME/CUE , we have  two script, first script is Starndard AA ,another is  No answer script(for Leave a Msg). a caller interacting with the Cisco UE AA presses the extension of the user when user extension no answer AA script tra...

I am facing problem in CME/CUE , we have  two script, first script is starndard AA ,another is  no answer script. a caller interacting with the Cisco UE AA presses the extension of the user when user extension no answer AA script transfer user to NO ...

We are currently using a UC320W for our router, phone system, and wireless.  We are wanting to add a device for VPN connections.  I was wanting to find out if we could disable the routing on the UC320 W and just have it on the lan and the wireless as...

Hello all,Does anyone know how I can configure an SPA112 to use Lync 2013 with an analogue extension please? I see registration attempts from the SPA112 but they don't seem to be successful and I get no dial tone when I pick up the analogue handset. 

I have three SPA302D handsets that when trying to place a call they continually display "Initializing Data" after a time of not using them.  The handset does ring when a call comes in, but after a few seconds into the call, it drops and I get a busy ...

A. We need the transfer to VM function available on our system B. When we answer a call, can we have the soft keys on the desk phones do the following?     1. XFER Transfer     2. BXFER Blind Transfer     3. XFR-VM transfer to VM     4. Conf C. And o...

How far can I span regular phone line from a Cisco SPA112 adapter? (while maintaining quality)

Hii I am new to the implementation of cisco BE6000. How can i activate the license of call manager 9.1 of cisco BE6000. It is having CUCM,UC, CCX,IM and Prsesnce, Povisioning, Emergency Responder. Telepresence server VCS and all optional. How to inst...