Resolved! Unable to access BE3000 after wizard
Hi all,I have configured a BE3000 using Wizard with manual setup and after restart I'm not able to access https://192.168.1.250 or https://192.168.1.250/cucmadmin/Any help?Thanks in advance.
Hi all,I have configured a BE3000 using Wizard with manual setup and after restart I'm not able to access https://192.168.1.250 or https://192.168.1.250/cucmadmin/Any help?Thanks in advance.
Hello All,Commissioning a new system and my first install with the SIP 9951's and UC520. With the help of some forum members we've managed to overcome the major issues I've experienced but its the small detail where I'm coming unstuck.Issues I could...
Dear Support Community,I have problems with the wlan conectivity of IP phones.I use several Cisco SPA525G2 IP phones which I like to connect to a cluster of two Cisco AP541N-E-K9 access points (with the latest firmware 2.0(2)).The athentication metho...
The UC540 includes an 8-user license by default, and is upgradeable to 32 users through a license upgrade. The UC540, like the UC520-24U, UC520-32U, and UC520-48U, has 1 PVDM2-64 module, which as twice as many DSPs as the PVDM2-32 module found on the...
Cisco Forums:For a UC540, the IP Phones are displaying a time that's about 2 minutes slower than the UC540 or Service Engine is configured. Might you know from where the IP Phones are drawing their time?The UC540 clock has been set manually (no curr...
OK I'm lost here, got a spanky new 9951 setup with the UC5x0 and it's time is an hour off. I check the other phones, they are fine, I check the UC and it is fine (using NTP) but the 9951 won't get the right time. I've done a full factory reset on it ...
Hi ,I have Cisco UC540 box and this is working fine between office , now this time I want to setup 3rd party SIP client phone , e.g. 3cx sip client..I have configured following configuration into box which I got from google , as I don't have good kno...
Have a UC540 with SPA525g2 telephones. Phones, UC, and CCA are all of the latest and greatest version. All incoming calls ring a blast group. We have turned of call waiting tone.If I am on my phone and a second call comes in it mutes the audio of ...
Hi friends,How can i pickup a call ringing another extension, using the SPA501G?TKS
Good Evening. I have been attempting to login to a customer's UC320 and have been unable to get the GUI to come up. I am able to pull up the site, it brings up the splash screen with the progress bar, but the login page never shows up. One thing I...
Here is the config..- 1 UC560 with 8 FXO ports- 2 Clinics (A and B we will call them)- Clinic A Ext. = 3xx, Clinic B Ext. = 4xx- Clinic A owns 6 of the trunks, Clinic B owns 2- Both Clinics are currently sharing all trunks for outging calls with some...
I work at a Credit Union and have 4 branch offices that are wireless. The main branch and 3 other branch offices are using wired Polycom phones. We use Interacton Client v 4. The wired Polycom phones do not have this issue. At the wireless branches, ...
Hi i'm Luis from México i configured a UC320W and 7 SPA502G Phones, one of my clients ask me if i can configure something like FollowMe/LocateMe services. As you can see on the image below, the UC320W comes with a Call Forwarding Function for either ...
Is anyone using a Cisco 2600 as their router for the SPA525 Phones? If not, what are the reason and configuration limitations with these routers?
I have a new UC560 with the 8.0.4 software pack. We are having an authentication error when a user tries to play a voice mail message in voiceview express. The odd thing is the user can log into voice view express without issue and browse the voice m...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: