Voice Systems and Accessories - Small Business

Hello,We have SPA8800 configured according document: I have 2 questions:1) (problem): Calls from anyone using a SIP Soft phone on a PC can route calls to the PSTN on the FXO ports: Is there a posibility to restrict only to Ip form Asterisk server? I ...

when a call is made from a pstn network to the sip, there is no ringback tone heard.  From sip to sip it work good.  i included the running config.

This SPA504g phone had power issues when upgrading its firmware. I have tried using spa50x-7-4-4-recovery which gives an error "Recovery Failed: Cannot find the specified device!".The phone and PC are on the same subnet (10.50.60.0/24) and i have tur...

Hi,Need help provisioning SPA303.FW: 7.4.7Model: Cisco SPA303 Have set up the profile rule: http://company.com//linksys/$PN/spa$MA.cfg, however upon boot up, device does not even request or point to that url instead it requests for:Read Request, File...

Hi All,I'm not able to set my SPA6901 and SPA508 phones with Cisco Assistant 3.0.When I set the IP address of devices for search, are prompted user and password (Please enter your username and password for realm "Admin" on "192.168.3.251"). Which use...

i have try to setup the uc520 auto attendant , but suddenly it just no able to function. All call goes to AA straigt to busy tone ? Anyone know how this happen ?

We have a potential customer with three sites. We are quoting 3 x UC560. Could you please advise on deployment of Smart CallConnector in this scenario. The documentation says it can handle 1 - 5 sites, but it's not clear how. Is it possible to deploy...

Does anyone know if the Linksys SPA3102 exports or can export logs of user activity for security status monitoring to a syslog server. We are looking for information to meet NERC CIP compliance.

Our SIP provider currently requires that we dial with a 1-XXXXXXXXXX even for local calls. Curious if its possible to allow a dial-pattern to add the "1" to the front of a standard 10-digital phone number.I don't see any way to do this with the CCA a...

So! 1)User has a shared line on two devices and a personal voicemail box.  When a caller trying to find that user in the Dial By Name directory enters the last name the system responds  "more than one listing was found" and begins to phonetically s...

Hi team,If we add a VG2xx or SPA8800 to a UC540 or UC560, will it use a single UC500 device license?Also, can you please confirm which analog gateways are supported: ATA187, VG202, VG204, SPA8800?Thanks,Alex

Hi,Anybody know what this reason meanssimilar to  633a02d1 - out of memory

Hello,we intend to use the named phones as public phones in callshops, i.e. as public "telephone boothes". The phones are good for this, because we can send accounting information on the display during the call.But we do NOT want the call duration to...