Voice Systems and Accessories - Small Business

Hello,I currently have a SPA9000+SPA400+5 SPA 942 phones. I am running an analog setup, using 4 PSTN lines, when I press 9 and dial the number there is a delay of about 5 seconds before the phone starts to dial out. Is there any way to shorten this d...

Hello.I am not very familiar with the Cisco SPA IP phone but i am researching an issue for my customer who is using SPA 303, 504G, 509G, 525GMy 1st and main question is how can i configure my customers SPA IP phones to advertise "G.729" in the SIP SD...

Is there a updated OOB guide for 3.0 CCA tool?I tried these links and all are not working.  Where is a OOB?CCA 2.2:  http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_assistant/version2_2_1/out_of_band_reference/cca_r22_oob_config_guidelin...

I am using a UC520 at a small business.  I need to change the auto attendant 1 to have a new *.wav file for button 3.  This gives a list of employee extensions and 2 people have left and I need to get them out of the list. I have the AA Script set at...

I have a big problem about language dictionary and its download from network. I have to install several SPA504G in a bank with a SIP PABX. The bank doesn't give me access to the internet and to any PC in the LAN for security reason. What I can I do w...

Hello,I completely agree that the latest CCA release allows you to do most if not all configuration tasks on a UC500 from the tool.  However, there are still a couple of things that you might want to do via the CLI.Is this supported or not? There use...

Hi!We had been running a PAP2-NA unit without problems for quite a while. Last week it started rebooting after every 5-6 seconds and keeps logging the followings:Jan  1 12:00:00 001217FD2269 System started: ip@192.168.6.5, reboot reason:H736c0041Jan ...

Can anyone tell me why the extenion port field would be disable?See the attached image.Restored everything to factory yesterday.I'm 99% sure I was able to assign an FXS port to an extension when changing the role to "User Type" prior to the rebuild.

'm attempting to factory reset a UC560 and running into all kinds of issues...I've tried the below steps on both a Win7 Laptop and WinXP VM (firewall off and other  NICs disabled) all running CCA 2.1 (2).From the Maintenance -> Restart/Reset menu, I'...

So I have a two site UC560 setup.  Which for the most part was setup using the CCA.  Some of the routing/etc had to be done manually due to a MPLS network existing, so there is no VPN its all over MPLS.That said voicemail on site A works fine from ex...

Pardon my ignorance, but Mutliparty conference is enabled.  However no of our SPA phones have the conference button whil on an active call.  The more softkey does not provide it either.  I have looked at the phone templates in CCA and see that our ph...

Has anyone gotten a gmail smtp server to work with the UC500?  I am having trouble finding a server that does relay.

So the UC-520 blew up on an upgrade and after working with TAC to recover from that, it was just quirky.  Decided to just blow it all away and start from scratch.  Everything seemed to be working, but my DIDs don't ring their assigned extensions, but...