Voice Systems and Accessories - Small Business

Sometimes when a user goes to answer a call on their headset, the call answers on their speakerphone instead. For example if a call if on hold on a line, and then lift the handset and press the line button to answer the call, the caller is heard on t...

Hi,We have the following scenario. We have a Cisco router 2811 with a HWIC ADSL card and an Ethernet interface G0/0. This router is connected to the internet using the HWIC interface which has a static public IP address. Behind the 2811 we have a Cis...

Hi,Reading the release notes for 3.0 it talks about Webex connect. Does this mean that the UC 5x0 systems will not support Webex Connect integration or is this still only for CME on the ISR platforms?Thanks in advance,Bob

Yes,I'm not going to go about setting up every time I need, I want to make sure that the ISDN GSM gateway connected to BRI0/1/1 port on a UC540W can directly dial any numbers... Well, it works but do not understand why the CCA does not allow me to en...

Where can I locate a BACD implementation guide for CCA 3.0 and the UC560?I need to know specifics about how many BACD groups or pilots you can build, what the maximum number the system can have in the hold queue at a time, what happens to the last ca...

SIP “Reason” Header in CANCEL Message SupportThis new feature added to the 7.4.7 firmware release seems to be a really great improvement...but there's no supporting documentation.  I've tried using the RFC outlined CANCEL message with the "Reason" he...

Hello Experts,I have a CME and UC500 setup for SIP calls. I can make SIP calls from CME to UC500 but not the other way around. here's the output of relevant configuration. Any help would be highly appreciated.CME - 3xxx UC520 - 2xxUC520dial-peer voic...

Salve sono un nuovo utente del spa 3102  molto vicino a gettare la spugna, vedo su internet che ci sono scuole di pensiero diverse riguardo i parametri di configurazione, penso che questa siala sede più opportuna per avere riferimenti più "seri" ho a...

HelloI'd like to configure my PAP-2T gateway to use it with two phone provider.Exactly: I'd like to use my outgoing calls to mobiles through one provider and to mobiles through another.Anyone could tell me how to do it?TIAmarek

Hello.I have SPA9000 system with SPA502G phones and SPA500S on couple phones. I was wondering can I configure SPA500S keys for call park? If yes, how.Thank in advance for any answer.BRSloba

Hi CommunityCan anyone tell me, witch POE class the SPA500 phones "is in". 0,1,...I only have the powerconsumption data

Hi, I have 525g with last firmware, and a attendant console, in the attendant console I have any extensions with blf, and I want to trasnfer a call using this keys.I want to do attendant transfer, so I received a call, push transfer and softkey exten...