Voice Systems and Accessories - Small Business

Today the fax speed of 2400 and 4800 are not supported in T38 on spa2102 and other cisco-linksys-sipura products.The sad think is that dhey are not able to fallback to g711 when a couterpart is hardlocked at those speed.So in that case we have 100% f...

Is there any way to configure the UC500 to lock all phones at night?  The company does not want the cleaning service to use their phone system afterhours.

Equipment: SPA9000, SPA400, 3 x SPA941, Phone Provider is Shaw Cable, with a telephony modem that has three PSTN lines.I am currently experiencing an interesting problem.  If I set the SPA9000 system AA to take all calls, this works as expected, outs...

ok ...when an SPA525G is operated in SIP mode, a lot of cool features such as downloading wallpapers from an TFTP server are available.(see https://www.myciscocommunity.com/docs/DOC-8495)when running the phone in SCCP mode, those features are missing...

I have a dozen of the SPA3000 devices connecting the different buildings and using NanoStation5 for my wireless links and have gotten all the phone lines, alarm systems and irrigation controls to work after a little work but the credit card swipe mac...

Hello,i have a small problem with a SPA508G on a UC520. It keeps picking up DHCP from the Windows server on the network, and connecting to the Data Vlan.The SPA525Gs on the network do not have this problem.How can I persude this one to connect to the...

I've searched the Cisco Web site and documentation and can't find any information or specifications for what I can connect to the MoH port. I have a Digital Messaging System with both a 600 ohm and an 8 ohm output. Which should I use to connect to th...

Hello,can i send 16kHz pulse for tarification from someone Cisco ATA?i means 16kHz for old analog PBX where i using ATA as outbound line.Regards,Tomas

Hello,I have sipura 2102-r 5.1.9 in sunrocket customize.But i have lost my admin password & i have reset factory full my sipura.what is the password of the IVR Sipura?Thanks

How many channel o port are available in a SIP trunk on UC500?

I need about 10 auto attendant scripts.  After 5, I am getting the message "aa application maximum limit exceeded."  Is there any way around this?

HI thereI have just rebuilt my UC520 and have noticed when I call any number with an auto attendant, asking to press 1 for this and 2 for that, my keystrokes from any phone does not get picked up.I have been using CCA to configure this. Is there some...

Where are all the SIP Trunk config guides posted for all the SP partners listed in the CCA drop-down menu?