Voice Systems and Accessories - Small Business

Hi,I'm trying to enable the customer admin on the CUE web gui. But i get Login failed. I've checked that the customer admin is on both CUE gui and under telephony service. What am I missing???ThanksEivind

Hi,Just a quick question, how many ACD scripts can I setup on CME??? I have a customer who wants ACD scripts for two different languages on the same CME, is this possible?? Does anyone have a best practice or a setup description??Thanks,Eivind

I have looked, and from what i can tell you cannot modify the background image on a 7925g as you can the toher 79xx series (most likely excluding the 7920 also). i just wanted to try and find a difinitive answer so i can stop looking.

I want to access the CLI over the Internet of my UC520.Internally I can telnet ot the CLI using Hyperterminal to the default address and port, 192.168.10.1 23I set up a telnet password and even set up a static nat to between by static public ip and t...

We would like to use the SNR feature on the UC520, but it takes way too many rings before the mobile gets its first ring, by that time the customer will have probably given up.With SNR enabled I place a call from an external line. After a couple ring...

Our system has worked with call forwarding and now it doesnt. All forwarding calls recieve a number not in service or unable to dial the number (I cant remember but its a fast busy either way)What do I check for this? As far as I know I dont have to ...

Since this is my first time i've setup a phone system I am unsure if the startup time for the ip phones on our network is normal. For example our Cisco SPA525G takes around 2 minutes to startup or restart. Most of the time is spent loading the XML fi...

I am noticing something weird, when I have our business line connected to the UC520 and make a call from an external land line, the exteral call rings twice before the first ring by an ip-phone connected to the UC520. If I plug our business line dire...